Fast N/A FB's
Rotary Freak
Joined: Jan 2004
Posts: 2,116
Likes: 1
From: Northern California
Swap in a S5 N/A motor, pineapple sleeves, custom intake manifold, standalone ECU and with the requisite fuel you could probably make ~210-220rwhp, which would make for a quick little FB if you stripped it out a bit.
^^ there has to be something wrong with your car.
with a stock port 12a with a weber 48IDF, RB light flywheel, RB full exhaust, no emissions and RB spark plug wires i hit a 15.3 in the 1/4. maybe it was really hot the night you ran?
this car also had an open diff, CRAPPY tires and needed to be tuned..bad
with a stock port 12a with a weber 48IDF, RB light flywheel, RB full exhaust, no emissions and RB spark plug wires i hit a 15.3 in the 1/4. maybe it was really hot the night you ran?
this car also had an open diff, CRAPPY tires and needed to be tuned..bad
Rotary Freak
Joined: Aug 2001
Posts: 2,267
Likes: 3
My basically stock GSL-SE can cover a 1/4 mile in 9 seconds flat @ 100 MPH, no lie! The exact same car can cover a 1/4 mile in 7.5 seconds @ 120 MPH. 
*100 mph = 146.666667 FPS. 1/4 Mile = 1320 Feet. 1320 Feet/146.666667 FPS = 9 Seconds flat. 120 mph = 176 FPS. 1320 Feet/176 FPS = 7.5 Seconds. Didn't say anything about a standing start.
*100 mph = 146.666667 FPS. 1/4 Mile = 1320 Feet. 1320 Feet/146.666667 FPS = 9 Seconds flat. 120 mph = 176 FPS. 1320 Feet/176 FPS = 7.5 Seconds. Didn't say anything about a standing start.
love the braaaap
Joined: Jul 2003
Posts: 3,771
Likes: 5
From: Bognor, Ontario
I'm hoping my car will do a mid to low 15 in the 1/4 mile. I've got an stockport 88 6 port, Jay-Tech intake mani with 600 CFM edelbrock sitting on top, no 6 port sleeves, unknown brand header with custom 2" true dual exhaust, and a lightweight RB flywheel. Stock ignition for now, untill I locate a 2nd gen coil to use my TT box. I figure it will put out about 160-170 hp, which is enough to get a 1st gen into the low 15's.
Play Well
Joined: Feb 2005
Posts: 4,218
Likes: 0
From: We're all fine here now, thank you. How are you?
Originally Posted by BootlegRX7
Are there any fast street legal N/A FB's? Do any of you guys own one and if so how quick is like quarter time, I know these cars aren't made to be quarter cars they're handling cars but I'm just curious if there are any quick FB's out there?
Fast, Street legal, NA, and FB do are words that do not belong together.
Bill Hates
Joined: Oct 2005
Posts: 1,469
Likes: 0
From: Earth
Originally Posted by rbf41182gt
man, that must be difficult to drive around town! I'm assuming you took the picture at a gas station because thats where it spends the majority of it's time! 
nice car!
nice car!
I have driven through the city before though, the looks on peoples faces were gold! Mad echo off the buildings and dutching with two stroke fumes the whole time 
Eats, Sleeps, Dreams Rotary
Joined: Jul 2004
Posts: 3,247
Likes: 2
From: Allentown, PA - Paterson, NJ
Originally Posted by z-beater
^^You must have a degree in business and engineering...number crunching for the engineering and BS for the business
If I were to go NA I would do a 3-rotor PP...
If I were to go NA I would do a 3-rotor PP...
Originally Posted by Roundabout
Anybody know where I find info on this car? searching....?
search TC for the user stretch
http://www.torquecentral.com/showthr...hlight=stretch
Originally Posted by Phiber Optik
Thread
Thread Starter
Forum
Replies
Last Post
