little mark

im putting the motor from an 86 into my 85 gsl-se and im switching the rats nest. On the 86 motor there is some kinda valve thing on top of the motor and it is in the way of the 85's rat nest. do they make a block off plate for this and where can i get it?

FB II

are you trying to put the 85 rats nest on to the 86 motor??

little mark

yes

Dan_s_young

iTrader: (1)

im sorry, but this is halarious...

trochoid

iTrader: (6)

Sounds like the egr vavle. Just make a block off plate for it, remove the studs and use bolts for the plate.

little mark

i know that but i wanted to just buy one because all the metal i have around is galvinized

trochoid

iTrader: (6)

I use 1/4" aluminum, then paint or powdercoat them. Most galvanized metals are too thin to be leak proof.

little mark

right thats why i wanted to buy one

FB II

http://www.rx7store.net/product_p/block%20plates.htm

little mark

i dont think they will work

little mark

any for an 86? and will that egr block out work on my motor?

trochoid

iTrader: (6)

A saber saw, drill with bit and a file is all you need to make a block off plate. If not, try RB or Mazdatrix.