Engine swap Question
#1
Full Member
Thread Starter
Join Date: Nov 2007
Location: greensboro
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Engine swap Question
I was wanting to know how hard would it be to swap out the Carburated motor for a 13bt from a turbo rx7? I doubt it would be any time soon, but I have found a place that has a lot of salvaged motors. What would I need to do the full swap? Would it be hard to do or would it be straight forward?
#3
Old [Sch|F]ool
I have a 13BT right now in my originally 12A car.
It's non turbo, and I'm running a Megasquirt, but it's a 13BT engine...
It goes like any other 13B swap, AKA it's pretty much a bolt in if you use the 12A trans. (Need a N/A flywheel from the same year range as the engine) Trans life will be short, but oh well. Spare transes are cheaper than a custom driveshaft, which you'll need to do the Turbo tranny.
It's non turbo, and I'm running a Megasquirt, but it's a 13BT engine...
It goes like any other 13B swap, AKA it's pretty much a bolt in if you use the 12A trans. (Need a N/A flywheel from the same year range as the engine) Trans life will be short, but oh well. Spare transes are cheaper than a custom driveshaft, which you'll need to do the Turbo tranny.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM