1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Electric Fans...How Big Do I Need?

Thread Tools
 
Search this Thread
 
Old 04-23-08, 12:24 AM
  #1  
spin******951
Thread Starter
 
Firstgen_Driver's Avatar
 
Join Date: Jan 2007
Location: Lincoln, Nebraska
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Electric Fans...How Big Do I Need?

I'm lookin to ditch my mech fan and i'm wonderin how big of a fan i need to get...i heard someone say nothin smaller then 2200 cfm but that seems pretty big to me...i can get a 1400cfm for $65 and i'm wonderin if that will be enough?

any input would be helpfull
Old 04-23-08, 12:40 AM
  #2  
djessence

 
djessence's Avatar
 
Join Date: Aug 2007
Location: Alberta, Canada
Posts: 2,062
Received 0 Likes on 0 Posts
I would say you NEED 2000 CFM absolutely minimum. Most people recommend 2500 CFM.

Rotaries run hot if you haven't already heard. Ricer fans, or even robust piston fans are just not enough.

If you cheap out on a fan you will be out of an engine.

Other common replacements are older taurus e-fans or MR2 fans which are almost direct bolt on, robust enough AND usually can be found easily enough in junk yards.

Flex-a-lite fans are common and offer a wide range of CFM all the way up to the black magic fan which is expensive but awesome.
Old 04-23-08, 12:52 AM
  #3  
spin******951
Thread Starter
 
Firstgen_Driver's Avatar
 
Join Date: Jan 2007
Location: Lincoln, Nebraska
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
yea i've read about the taurus and mr-2 fans...i work at autozone so what i did is i looked up a replacement elec fan for a 93 taurus and it pulled up the 1400 cfm...so 2000 cfm min then you would say?
Old 04-23-08, 12:55 AM
  #4  
djessence

 
djessence's Avatar
 
Join Date: Aug 2007
Location: Alberta, Canada
Posts: 2,062
Received 0 Likes on 0 Posts
Thats what i personally recommend. I didn't know the stats on the taurus fan that some people use successfully.

I mean flex-a-lite has some good inexpensive fans. Its just something I would not want to risk if buying a new one vs finding one in a junk yard and trying it out for 20$
Old 04-23-08, 10:46 AM
  #5  
Resurrecting Gus

iTrader: (4)
 
Glazedham42's Avatar
 
Join Date: Jul 2003
Location: Indiana
Posts: 2,790
Likes: 0
Received 4 Likes on 3 Posts
This is the Taurus fan that you want. It is unmatched by all others, in my opinion.

http://cgi.ebay.com/ebaymotors/MUSTA...spagenameZWDVW

I think there are two different fans for that model of car, depending on which engine you have. You want the 2 speed fan from the V6 Taurus. I don't know how many CFM the fan puts out, but I can tell you that it is unlike anything I've ever felt before. You can stand at the back bumper, or even 2-3 feet from the back bumper, and feel the fan blowing. You might want to upgrade to a S4 alternator if you use this fan also. It pulls about 25-28 amps while running, so it can be a little harsh on the stock 1st gen charging system. But, oh how it keeps the 12A cool...
Old 04-23-08, 11:03 AM
  #6  
7less for now!

 
yetterben's Avatar
 
Join Date: Oct 2007
Location: eau claire
Posts: 1,372
Likes: 0
Received 0 Likes on 0 Posts
Mr2 fans are like a tornado as well. I have them on my turbo 12a keeps it cool. The upgraded alt is a must with these they put a big strain on the system when on. You can also get away with running just one of these as well. I have pics on here some where with the fan installed.
Old 04-23-08, 05:46 PM
  #7  
spin******951
Thread Starter
 
Firstgen_Driver's Avatar
 
Join Date: Jan 2007
Location: Lincoln, Nebraska
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
how would i go about upgrading the alternator? what do i need to take one from?
Old 04-23-08, 06:16 PM
  #8  
Censored

iTrader: (14)
 
ray green's Avatar
 
Join Date: Jul 2002
Location: Georgia
Posts: 11,368
Received 176 Likes on 137 Posts
If you keep the stock fan you won't need a big efan (the stock one is way more efficient). Ditto for the alternator.
Old 04-23-08, 06:22 PM
  #9  
need hood

 
1stGenJake's Avatar
 
Join Date: Oct 2006
Location: Kansas City
Posts: 160
Likes: 0
Received 0 Likes on 0 Posts
does it really make that much difference to switch to e-fan?
Old 04-23-08, 06:23 PM
  #10  
7less for now!

 
yetterben's Avatar
 
Join Date: Oct 2007
Location: eau claire
Posts: 1,372
Likes: 0
Received 0 Likes on 0 Posts
The stock alt is a joke. Most cars the volt meter moves when the blinkers are on. regardless about efan Upgrading the alt is a most once you start using bigger fuel pumps and 2nd gen coil and stereo equipment.

Switching from the stock fan will give you no improvement really other than quicker rev's in 1st and 2nd. If you dot need the space or your clutch fan is working right stick with it
Old 04-23-08, 06:28 PM
  #11  
Lives on the Forum

iTrader: (13)
 
Rx-7Doctor's Avatar
 
Join Date: Jul 2004
Location: Oregon
Posts: 10,584
Likes: 0
Received 11 Likes on 10 Posts
There are a bunch of threads in the Archives on alternator upgrades. Look under the heading of electrical and those should bring up all the different choices.






Originally Posted by Firstgen_Driver
how would i go about upgrading the alternator? what do i need to take one from?
Old 04-23-08, 06:31 PM
  #12  
Lives on the Forum

 
Kentetsu's Avatar
 
Join Date: Jun 2004
Location: Grand Rapids Michigan
Posts: 11,359
Received 14 Likes on 11 Posts
I'm using the MR2 fans, with the stock alternator, and love it. It looks pretty good too, if I don't say so myself.

https://www.rx7club.com/showthread.p...highlight=pics
Old 04-23-08, 06:57 PM
  #13  
Censored

iTrader: (14)
 
ray green's Avatar
 
Join Date: Jul 2002
Location: Georgia
Posts: 11,368
Received 176 Likes on 137 Posts
That does look good Ken, and you have a spare when one of the efans break down!

I haven't had this experience with my stock alternators:

"Most cars the volt meter moves when the blinkers are on"

Of course I don't have a bigger fuel pump (mine's stock) or stereo equipment (strictly stock Clarion here). But I do have the 2nd gen coil doing its direct fire thing, no problems there.

I'd save your bucks for gas, that stuff is getting pretty expensive.
Old 04-23-08, 07:02 PM
  #14  
sellout

iTrader: (4)
 
Midwest 7's's Avatar
 
Join Date: Jan 2005
Location: Lawrence KS
Posts: 3,078
Likes: 0
Received 0 Likes on 0 Posts
i ran some cheap 10in e fan from the swap meet for years and didnt have any problems. i also had a fmoc and dellorto with heatshield to help cooling.
Old 04-23-08, 07:19 PM
  #15  
Lives on the Forum

 
Kentetsu's Avatar
 
Join Date: Jun 2004
Location: Grand Rapids Michigan
Posts: 11,359
Received 14 Likes on 11 Posts
I was actually running only one of those fans for about two years. I just added the other one this spring while installing the new motor. Even with one fan, I never had an issue with temps even while racing...
Old 04-23-08, 09:36 PM
  #16  
7less for now!

 
yetterben's Avatar
 
Join Date: Oct 2007
Location: eau claire
Posts: 1,372
Likes: 0
Received 0 Likes on 0 Posts
I Love Mine And Its All Thanks To Kentetsu
Old 04-23-08, 09:56 PM
  #17  
Audio Cronic Syndrome

 
blazer1313's Avatar
 
Join Date: Nov 2003
Location: Anacortes, WA Hometown: P.O., WA
Posts: 890
Likes: 0
Received 0 Likes on 0 Posts
'92 Ford Escort fan. Has always run cool for me but then again I'm running a FC oil cooler mounted farther foreward too. I upgraded to the FD alternator the same time so I don't know how the crappy 50 amp stock alt would hold up.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cook11
V-8 Powered RX-7's
1
10-02-15 11:52 AM



Quick Reply: Electric Fans...How Big Do I Need?



All times are GMT -5. The time now is 04:37 AM.