E-shaft pully WILL NOT COME OFF
#1
Senior Member
Thread Starter
Join Date: May 2003
Location: Springfield MO
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
E-shaft pully WILL NOT COME OFF
I can not get the bolt that holds the main pulley on, off. I broke a 3/8" drive 19mm socket almost in half, and have succesfully rounded the head of the bolt, I am at an impass, I dont know if I should go on and take the rest of the engine apart and worry about it later, I do not believe that would go over well though.
What to do, what to do,
What to do, what to do,
#4
Senior Member
Thread Starter
Join Date: May 2003
Location: Springfield MO
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
well the engien happens to be on a stand, uh, i think it is the 1/2 im not sure its the biggest on that comes in a craftsman 90pc tool set,.
I proceeded to use a big solid bar to keep the engine from turning then went to town on the breaker bar, its a good 2' bar, but like i said I put enough torque on it to bust the socket, then got another and decided to try pulling rather than pushing, thats when it rounded off,
Does this bolt go right int the Eshaft as the name implies? or does it go into a gear that is somehow attached to the eshaft? can i just cut it off and proceed as i had unbolted it?
I proceeded to use a big solid bar to keep the engine from turning then went to town on the breaker bar, its a good 2' bar, but like i said I put enough torque on it to bust the socket, then got another and decided to try pulling rather than pushing, thats when it rounded off,
Does this bolt go right int the Eshaft as the name implies? or does it go into a gear that is somehow attached to the eshaft? can i just cut it off and proceed as i had unbolted it?
#7
love the braaaap
That bolt along with the flywheel nut are both a PITA. I did break a good quality 3/8 drive ratchet on the main pulley bolt. 1/2" drive ratchet with a 3' extension worked well. Get an impact socket for the job, even if your not using an impact wrench. I find they have less of a tendancy to round the head of a bolt off.
Trending Topics
#8
Old Fart Young at Heart
iTrader: (6)
I had a TII that I had lots of trouble with. Even with my 1/2" impact, which literally zips the flywheel nut off. I even put the flywheel nut back on, tightened back as tight as I could with the impact, blocked the fly nut and put the impact on the e-shaft. Guess which one gave first.
I finally gave up and took the motor to a friend at the Ford dealership, he broke it loose with a 3/4" impact, and even that was a stuggle.
I finally gave up and took the motor to a friend at the Ford dealership, he broke it loose with a 3/4" impact, and even that was a stuggle.
#9
My buddy had a diesel shop try to zap his off with a 3/4 impact gun, and he couldnt get it off. He had to use his 350 lb dad to stand on a 5 foot long tube on the end of a pipe wrench going over the pulley, and a 10 ft long tube on a 1/2 breaker bar going to the nut. That'll break it loose.
#10
Burning Oil-Grinding 3rd
Originally Posted by 85rotarypower
That bolt along with the flywheel nut are both a PITA. I did break a good quality 3/8 drive ratchet on the main pulley bolt. 1/2" drive ratchet with a 3' extension worked well. Get an impact socket for the job, even if your not using an impact wrench. I find they have less of a tendancy to round the head of a bolt off.
#12
standard combustion
Join Date: Dec 2001
Location: Twin Cities Minnesota
Posts: 1,374
Likes: 0
Received 0 Likes
on
0 Posts
You should be usinga 6point socket if you do try to get it off with a impact or whatever. Those damn 12point sockets should never be used on bolts that are tight IMO
#16
Senior Member
Thread Starter
Join Date: May 2003
Location: Springfield MO
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
well the CHEESE worked..............
really I litterly picked the engine up and put it in the back of my brothers truck and took it the the diesel shop my dad and uncle work at, my uncle in the gear shop used the biggest F-ing impackt i have ever seen, litterly looked like a 2.5' jack hammer with a big *** handle and everything, that got it off
really I litterly picked the engine up and put it in the back of my brothers truck and took it the the diesel shop my dad and uncle work at, my uncle in the gear shop used the biggest F-ing impackt i have ever seen, litterly looked like a 2.5' jack hammer with a big *** handle and everything, that got it off
#18
The AUTO DOCTOR
Join Date: Mar 2001
Location: South Side of ATL. Ga.
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
HEAT is a good thing to help out with getting hard *** bolts loose. A little trick i learned when doing the main pully bolt is to get a big *** breaker bar and rest it on the inside of the fender and while it is firmly held in place bump over the motor and BINGO that sucker is broken free
Thread
Thread Starter
Forum
Replies
Last Post