Dual 36MM Carbs in a 12A Bridge Port??
#1
No Pistons
Thread Starter
Join Date: Sep 2004
Location: Guatemala City
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Dual 36MM Carbs in a 12A Bridge Port??
Does anyone has a n Idea of how a dual carb (Weber 36MM) will work in a 12A Bridge Port engine????
I have a firend that has this carbs is his garage and he is goig to sell them so I want to try them in my car but I don`t know exactly if they will work well.
They were in a 13B Bridge Port but they have not being in a car for at least one year....
Can someone help me with this????
Best Regards....
I have a firend that has this carbs is his garage and he is goig to sell them so I want to try them in my car but I don`t know exactly if they will work well.
They were in a 13B Bridge Port but they have not being in a car for at least one year....
Can someone help me with this????
Best Regards....
#2
No Pistons
Thread Starter
Join Date: Sep 2004
Location: Guatemala City
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Killer Bee Fan
Does anyone has a n Idea of how a dual carb (Weber 36MM) will work in a 12A Bridge Port engine????
I have a firend that has this carbs is his garage and he is goig to sell them so I want to try them in my car but I don`t know exactly if they will work well.
They were in a 13B Bridge Port but they have not being in a car for at least one year....
Can someone help me with this????
Best Regards....
I have a firend that has this carbs is his garage and he is goig to sell them so I want to try them in my car but I don`t know exactly if they will work well.
They were in a 13B Bridge Port but they have not being in a car for at least one year....
Can someone help me with this????
Best Regards....
#4
The Shadetree Project
iTrader: (40)
Well from what I've read those carbs only flow enough for a mild street port. So I'd figure they're not going to flow enough for a bridge. people running mild streetports with dual 40 DCOE's run 36mm chokes and that just cuts it. So my recomendation is that dual 36mm carbs are prolly going to be running 32 or at the most 34 mm chokes and they're barley going to be enough for a streetport...
#5
No Pistons
Thread Starter
Join Date: Sep 2004
Location: Guatemala City
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DriveFast7
I'd go for it. If they are the 36 DCD dual carb setup that Rotary Engineering sold back in the day, that is a good carb setup. Makes very good torque and HP.
Do you think they will make more HP and torque than the Weber 45 DCOE that I have right now???
I have trouble getting to 8,000RPM with this carb...
#7
No Pistons
Thread Starter
Join Date: Sep 2004
Location: Guatemala City
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 680RWHP12A
yes they will work better than the single 45 carb for sure!!!
help you beat the mustangs!!!!
help you beat the mustangs!!!!
Does anyone knows how much fuel press has to be for them????
Trending Topics
#8
No Pistons
Thread Starter
Join Date: Sep 2004
Location: Guatemala City
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 680RWHP12A
yes they will work better than the single 45 carb for sure!!!
help you beat the mustangs!!!!
help you beat the mustangs!!!!
For the race with the mustangs we are 3 for 3... Trouble with carb.....
#10
Blood, Sweat and Rotors
iTrader: (1)
Originally Posted by Hyper4mance2k
Well from what I've read those carbs only flow enough for a mild street port. So I'd figure they're not going to flow enough for a bridge. people running mild streetports with dual 40 DCOE's run 36mm chokes and that just cuts it. So my recomendation is that dual 36mm carbs are prolly going to be running 32 or at the most 34 mm chokes and they're barley going to be enough for a streetport...
For the dual downdrafts, they came with 25mm chokes in primarys, 32mm in secondarys. I would definately increase those sizes, mabye start with 28mm and 34mm for a nice progression.
Or do what wacky does and just remove the chokes?
#11
Blood, Sweat and Rotors
iTrader: (1)
Originally Posted by Killer Bee Fan
Do you have an idea for the correct jetting for this carbs???
Does anyone knows how much fuel press has to be for them????
Does anyone knows how much fuel press has to be for them????
application is a stock 12A
1st number is for the Primary and the 2nd, Secondary
Venturi 25mm / 32mm
Main Jet 135 / 135
Air Correctors 260 / none used
Emulsion tube F23 / F23
Rally/Street port 12a:
Venturi: 25mm / 32mm
Main Jet: 140 / 140
Air Correct: 260 / none used
Emul. Tube: F23 / F23
Not sure what fuel pressure to run, but can say weber dcoe and dellorto dhla only need 1.75 to 2.50psi. I run 2.25 on both my dellortos and have not run out of fuel yet.
#15
No Pistons
Thread Starter
Join Date: Sep 2004
Location: Guatemala City
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nick1
are you going to sell your 45?
if so how much?
if so how much?
The problem is that I live in Guatemala, Central America so I think it is going to be more easy to get one in the US or Canada.