1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Dropped the Hood - Forgot There's no Latch Cable!

Old Jul 8, 2002 | 10:22 PM
  #1  
Sterling's Avatar
Thread Starter
Nikki-Modder Rex-Rodder
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 2,890
Likes: 14
From: Trying to convince some clown not to put a Holley 600 on his 12a.
Dropped the Hood - Forgot There's no Latch Cable!

So happy I was to have gotten my 82 project car running, that I dropped down the hood, and immediately said, "(insert several explicatives here)!!!"
I never did reconnect the hood latch cable, and so now my hood is stuck latched.

What can I do?

(Ya know, I'm asking for advice here, so be sure to leave some after you get done pokin' at me!)
Reply
Old Jul 8, 2002 | 10:30 PM
  #2  
82streetracer's Avatar
8/1 Building/Drive Ratio
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jan 2002
Posts: 2,397
Likes: 1
From: Mound, MN
I do **** like that all the time.(damn ADD)
anyhoo, I would guess it would be like jimmying a door open with a credit card. use a slim jim or something and trip the latch.
Reply
Old Jul 8, 2002 | 10:35 PM
  #3  
REVHED's Avatar
Hunting Skylines
Tenured Member: 20 Years
 
Joined: Apr 2001
Posts: 3,431
Likes: 4
From: Brisbane, Queensland, Australia.
Jack the car up and see if you can get at the latch from underneath.

Other than that, try going and doing a search at Mazspeed. I remember this happened to someone there and I believe they managed to get it open without doing too much damage.
Reply
Old Jul 8, 2002 | 10:39 PM
  #4  
Wattz's Avatar
Banned. I got OWNED!!!
 
Joined: Oct 2001
Posts: 670
Likes: 87
From: Seattle
Climb on top of your car, and jump up and down on the hood screaming those same explitives...

That'll do it.
Reply
Old Jul 8, 2002 | 11:46 PM
  #5  
setzep's Avatar
Rotary Freak
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 2,524
Likes: 0
From: MN
Well you could always pretend it's a Dodge K-car and drive it till it stops running and throw it away
Reply
Old Jul 9, 2002 | 12:58 AM
  #6  
mperformance's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Mar 2002
Posts: 914
Likes: 0
From: far away
long screwdriver a flashlight...jack up the car...it's easy!
Reply
Old Jul 9, 2002 | 01:12 AM
  #7  
Keaponlaffen's Avatar
---------------------
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 2,029
Likes: 0
From: Kamloops BC Canada
I'm with setzep on this one... definately drive it till it drops, then just throw it away and get a new one for cheap...


Jeff
Reply
Old Jul 9, 2002 | 07:58 AM
  #8  
Sterling's Avatar
Thread Starter
Nikki-Modder Rex-Rodder
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 2,890
Likes: 14
From: Trying to convince some clown not to put a Holley 600 on his 12a.
All great suggestions, guys!
However, I think I'll try the "Jack it up and use a screwdriver..." technique.

If that does'nt work, then I'll jump on the hood screaming.

If that does'nt work, I'll just drive it till the oil's gone, and throw it away like a used paper towel.
Reply
Old Jul 9, 2002 | 12:07 PM
  #9  
Jeff20B's Avatar
Lapping = Fapping
Tenured Member 15 Years
iTrader: (13)
 
Joined: Aug 2001
Posts: 15,725
Likes: 91
From: Near Seattle
My friend once needed to raise the hood on a parts car 7 but the latch was broken. He took out the big old Thor hammer and punched several holes all around the latch and cut inbetween them. He raised the hood with a piece still attatched to the latch.

Definitely try the jack and screwdriver method first, hehe!
Reply
Old Jul 9, 2002 | 04:17 PM
  #10  
MIKE-P-28's Avatar
Driven a turbo FB lately?
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
I beleive when this happened to me, I used a broom stick. Get it way up in the air, and try to hit the release on the latch from the drivers side , I think.. I know one side its easier on
Reply
Old Jul 9, 2002 | 04:19 PM
  #11  
mar3's Avatar
Administrator
Tenured Member: 25 Years
iTrader: (8)
 
Joined: Nov 1998
Posts: 12,974
Likes: 62
From: So. Arlington, TX!!!
Go ahead and cut the hood for your scoop or Ram Air set up now and stuff your arm in there...
Reply
Old Jul 9, 2002 | 09:50 PM
  #12  
ASEmaster's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Mar 2002
Posts: 287
Likes: 0
From: Ohio
Plenty of useable hoods in the boneyards... I'd say it's can-opener time to the one you've got. When you're done you can still use it as a sled in the winter.
Reply
Old Jul 10, 2002 | 02:16 AM
  #13  
peejay's Avatar
Old [Sch|F]ool
Tenured Member: 25 Years
Liked
Loved
Community Favorite
 
Joined: May 2001
Posts: 12,871
Likes: 574
From: Cleveland, Ohio, USA
I had this happen to me once - the latch cable came undone.

What I did was jack the car up, reach up and pop the latch from underneath. You have to get it from the passenger (manifold) side, not very fun when the header is hot!
Reply
Old Jul 10, 2002 | 08:06 AM
  #14  
Defprun's Avatar
Punk Ass Bitch
 
Joined: Dec 2003
Posts: 99
Likes: 0
From: Welland, Ontario
Yes, wait for car to cool down before deepfrying your arm.

Now, remind me to kill my fathers mechanic, hes one of those people that slam hoods, I've seen him do it to my car, and I'm sure he did it a bunch more times when it was in his shop. Don't be surprised if you see a house full of cow excrement and a red 1st gen fleeing from the scene.
Reply
Old Jul 10, 2002 | 08:01 PM
  #15  
Sterling's Avatar
Thread Starter
Nikki-Modder Rex-Rodder
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 2,890
Likes: 14
From: Trying to convince some clown not to put a Holley 600 on his 12a.
Originally posted by mperformance
long screwdriver a flashlight...jack up the car...it's easy!
Ahhh you guys are all so fulla ****! I stuffed all 215 pounds of my fat self up in there, and could find ****!
"Just go in from under the front..."...Indeed!

Luckily I did have the wiper vent piece removed, so there was plenty o' room for me to do the ole 'coat-hanger' deally on 'er.

The uh cable...It's hooked up now!
Reply
Old Jul 10, 2002 | 09:14 PM
  #16  
Defprun's Avatar
Punk Ass Bitch
 
Joined: Dec 2003
Posts: 99
Likes: 0
From: Welland, Ontario
I'm glad you have that resolved without any body damage, hate to see any part of a r'ex harmed.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vmerino
2nd Generation Specific (1986-1992)
0
Sep 5, 2015 11:26 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:33 PM.