Does this look normal? Brake Boost
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2005
Location: Richmond Hill, ON
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Does this look normal? Brake Boost
Does this look normal to you? I'm about to replace the master brake cylinder and noticed that the rod came out as well. I cleaned it up and it looks okay but I'm wondering if it's supposed to do that.
#5
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,832
Received 2,603 Likes
on
1,847 Posts
not normal, but put it back and see if it holds vacuum
#6
Senior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2005
Location: Richmond Hill, ON
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
hmm. I went digging through my inventory of parts and found another booster from an SE I once had. It did the same thing. Rod, rubber gasket and metal washer all came out in my hand with little or no force.
I'm going to do as you suggested and cross my fingers that it holds the vacuum. I won't have the car running for a while so I'll have to put it together, get the car running, and then test out the brakes. Thanks.
I'm going to do as you suggested and cross my fingers that it holds the vacuum. I won't have the car running for a while so I'll have to put it together, get the car running, and then test out the brakes. Thanks.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
3
08-20-15 10:24 PM