ioTus

iTrader: (5)

I'm goign to be doing the DLIDFIS setup soon, w/ all new jacobs coils, and i'm gonna need to fab up some wires.

i'm HOPING to detail my engine in blue, so if i could get a set in blue that would be best.

So, where can i get a set like this, of GOOD wires, and is it goign to come w/ all the needed plugs and connectors? or am i gonna need to special buy those too?

Thanks!

Geoff

inittab

Why have you settled on DLIDFIS? I'm gonna try installing a direct fire system using a 2nd Gen coil similar to this setup

ioTus

iTrader: (5)

OOOOH!

And how does this fare, similar results to the DLIDFIS?

I'm very interested in this.

Will this use the stock wire setup? Cause i wanna just buy Jacob's wires and call it good....

inittab

Good question! Untill someone proves different I would say that they are absolutely compariable. Also, the 2nd Gen coil setup seems a whole lot simplier to me.... ya know... the KISS principle. I picked up a 2nd gen coil for 15 bucks on eBay + shipping ...... I'm giving it a try, it'll bypass the dizzy cap which seems to be the main advantage anyway. Once it's setup I'm gonna have a set of custom Magnecor wires made.

CrazyJoe12a

I have a set of NGK wires on mine that are blue...

Jeff20B

iTrader: (13)

Blue NGK wires here too.

Somebody once fried an ignitor from hooking it to a 2nd gen coil. Maybe you'll have better luck? Er, good luck. (I have only ever used 1st gen coils)

RotorMotorDriver

iTrader: (1)

Accel makes blue wires too .

~T.J.

MIKE-P-28

iTrader: (1)

I opted for a Taylor's ... 8mm and 10mm in any color you can think of..

Directfreak

iTrader: (2)

Accel Thundersports.