Combo switch spinning
#1
Full Member
Thread Starter
Combo switch spinning
My combo switch seems loose on the steering column and just spins around. The bolt on the little band that holds it to the column is as tight as it can get. How else can I hold this straight?
#3
acdelco d1906 Nkg 49034
there's supposed to be an 1/8th inch (about) tab that sticks out of the steering column at a 90 degree angle that goes into the clamp. You can/feel it on the underside of the column.
A few fanatical helpers here will remove their combi assembly just so they can post a picture here showing what I mean
A few fanatical helpers here will remove their combi assembly just so they can post a picture here showing what I mean
Last edited by midnight mechanic; 10-14-20 at 09:15 AM.
#5
www.AusRotary.com
The plastic tab that the metal loop hooks over frequently snaps off during improper removal of the combination switch. You can improve a new tab with a long self-tapping screw.
I don't have good photos unfortunately as the RHD combination switch has a completely different shape body to your ones.
I don't have good photos unfortunately as the RHD combination switch has a completely different shape body to your ones.
Thread
Thread Starter
Forum
Replies
Last Post
82transam
1st Generation Specific (1979-1985)
2
02-01-05 08:58 PM