Coil wiring?
#1
Full Member
Thread Starter
Coil wiring?
Hey. Just tested for spark on my 83 GSL, and there’s none. Just replaced distributor cap, rotor, coils, wires, and plugs... and nothing. I was looking in the wiring diagram form the 79-80 manual, and something missing... what is it?
#2
84SE-EGI helpy-helperton
Ignitors. The 79/80 models had Ignitors located in that spot in your picture where there's a 10mm bolt head and a piece of plastic. Normally, there would be a remote-mounted Ignitor Plate with 2 Ignitors mounted to it to provide spark triggering.
Without a method of triggering the Coils, you'll get zero spark at the plugs.
Unless you've retrofitted a later model Distributor with the Ignitors mounted to the sides of it, then that's what you're missing.
Without a method of triggering the Coils, you'll get zero spark at the plugs.
Unless you've retrofitted a later model Distributor with the Ignitors mounted to the sides of it, then that's what you're missing.
Thread
Thread Starter
Forum
Replies
Last Post