Can't Identify My Holley Carbs.
#1
Newbie
Thread Starter
Join Date: Dec 2019
Location: Syracuse, NY
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Can't Identify My Holley Carbs.
I bought an 81 a little while back. This winter my plan is to tear everything down, clean, replace gaskets
and reassemble. I wrote down everything I could find on the carbs. They are both Holley 2 barrels. Rear carb shows 3182 on the upper flange, and B-5. On the body its has 12R 5490 B, C5, D5. Under the upper flange has 1R 1262 B, A5. The lower flange has 0874.
The front carb has 1964, and a B on the upper flange. 12R 5490 B, and C on the body. 1R 1262 B under the upper flange. 2484 on the lower flange.
Any help would be greatly appreciated I've been searching everywhere and can not find a match. I am hoping someone here is possibly running the same setup.
and reassemble. I wrote down everything I could find on the carbs. They are both Holley 2 barrels. Rear carb shows 3182 on the upper flange, and B-5. On the body its has 12R 5490 B, C5, D5. Under the upper flange has 1R 1262 B, A5. The lower flange has 0874.
The front carb has 1964, and a B on the upper flange. 12R 5490 B, and C on the body. 1R 1262 B under the upper flange. 2484 on the lower flange.
Any help would be greatly appreciated I've been searching everywhere and can not find a match. I am hoping someone here is possibly running the same setup.
#3
Newbie
Thread Starter
Join Date: Dec 2019
Location: Syracuse, NY
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I've been searching the internet and can confirm they are ford pinto carbs. Some sort of non choke version, I still can't figure out a model number for the carbs in order to buy rebuild kits. The choked version is almost the exact same but has minor differences, anyone know if the kits would be the same between both?
#4
Damn, it did start!
nevermind . I figured out may question
Last edited by Richard Miller; 12-12-19 at 06:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
seanrot
1st Generation Specific (1979-1985)
18
10-05-04 11:03 PM