blaankty blank engineers
#1
recycled teenager
Thread Starter
Join Date: Feb 2004
Location: Jackson MI USA
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
blaankty blank engineers
I have found a new reason to hate engineers, has anyone tried to remove the upper nut on the inside of the car , that holds on the clutch master cylinder? The assemblers must be tiney people . Wish I could sometime find the designer and make him take one off. the bottom is not bad ,but the top one is bloody imposible. Vent Vent. Bob
#4
That one is disappointing to hear... my pillar seal or whatever is in there is leaking pretty bad and i know i'm gonna have fun when i finally find a new seal to put in...
#5
1st-Class Engine Janitor
iTrader: (15)
Hot tip; get a "shorty" combo wrench set. It takes it from impossible to merely difficult and requiring 1-finger braille skills. Give up on being able to see what you are doing - - it's done by feel. The nut is boxed in on 3 sides plus top and bottom.
The pillar seals are o-rings. Hylomar (aka 'Smurf Snot') will hold them in place while you get the nuts on.
The pillar seals are o-rings. Hylomar (aka 'Smurf Snot') will hold them in place while you get the nuts on.
#7
Lives on the Forum
Replaced mine in like ten minutes, maybe less. Couple of guys with me couldn't believe it. It was the first time I'd ever tried to do one, and had no trouble at all.
All I can tell you is that the car was up on jackstands for other repairs, way up. I was able to kneel next to the car and reach up under the dash. I guess that's what must have made the difference...
Good luck man
All I can tell you is that the car was up on jackstands for other repairs, way up. I was able to kneel next to the car and reach up under the dash. I guess that's what must have made the difference...
Good luck man
Trending Topics
#9
common sense prevails....
iTrader: (7)
Join Date: Jul 2008
Location: Chino and Lake Arrowhead Calif
Posts: 1,669
Likes: 0
Received 9 Likes
on
9 Posts
on the master....yeah it is a bitch.. I have this 3/8 socket extension....don't know where I got it, but the edges where it inserts the socket are purposefully beveled so that it has the most slight pivot action to it.... No more flop flop of a universal..but just enough angle of the socket...
It worked perfect on the master cylinder swap..
It worked perfect on the master cylinder swap..
#10
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,920
Received 2,660 Likes
on
1,884 Posts
its easy if you have a 1/4" ratchet...
#11
My 7 is my girlfriend.
iTrader: (5)
Join Date: Feb 2006
Location: London, Ontario, Canada
Posts: 3,162
Likes: 0
Received 1 Like
on
1 Post
Keep in mind, the engineers that designed these cars were Japanese men. Very small people. I think I actually laid upside down in the drivers seat when I swapped my clutch master. I don't want to do that job again, but have no doubts that I will one day have to. Maybe someone should design a cable operated clutch system for the first gen.
#13
1st-Class Engine Janitor
iTrader: (15)
And don't get me started on the wife's FWD V6... double-jointed monkeys would be hard-pressed to work on it. Changed a power-steering hose on it a while back... (shudder).
#14
Lapping = Fapping
iTrader: (13)
Yeah. A waterpump went out on my mom's '98 Stratus. You have to pull the engine to change it. It was still under some sort of warranty so I didn't have to touch it. The sad part, for them, is when we got it back, it still leaked. Turned out to be a defective new part. So they had to pull the engine to change it again. Glad I didn't have to do anything on it.
#15
Lives on the Forum
Don't even get me started on the '92 Audi I used to own.
Thermostat and water pump, located behind the timing belt.
Need to change out the steering rack? Ten hour job...
Power windows not working? Need another $640.00 relay.
The only item I was able to work on with any success was new rotors and calipers.
Thermostat and water pump, located behind the timing belt.
Need to change out the steering rack? Ten hour job...
Power windows not working? Need another $640.00 relay.
The only item I was able to work on with any success was new rotors and calipers.
#16
Can Post Only in New Member Section
Join Date: Mar 2009
Location: Oklahoma
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Here's why engineers make things hard for the mechanic. The first engineers knew that a mechanic would need to work and replace parts so they spent long hours designing things simple for the mechanic. One night the engineer get home early to find the mechanic in bed with his wife. Now the mechanic spends long hours working while the engineer is home or sleeping with the mechanic's wife
#18
Banned. I got OWNED!!!
iTrader: (7)
Join Date: Dec 2008
Location: Oregon
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
Yeah the master cylinder is a biatch. I have a somewhat cool solution for the S2 dash. that makes getting at everything much easier with it out. I removed it stripped off all the foam sanded and painted it black. Its still a work in progress, but I'm only running the top part to hold my gauges. I'm taking the mounting points of the bottom and cutting every thing else off. So No glove box witch is a pita at times, but I haven't had one for a long time before this all happened.
Note the dash was cracked and falling apart. the foam was deteriorating. so it actually looks 100 times better. anyways plan is for the dash to be easy to remove. except for that middle bolt up top. I'm also gutting everything behind it. I'm going to stop daily driving the FB during the winter months. I should be getting a T2 soon. But FB will be my summer car. I need to get some work done on her anyway to get her ready for Auto X next year. and pretty her up.
Note the dash was cracked and falling apart. the foam was deteriorating. so it actually looks 100 times better. anyways plan is for the dash to be easy to remove. except for that middle bolt up top. I'm also gutting everything behind it. I'm going to stop daily driving the FB during the winter months. I should be getting a T2 soon. But FB will be my summer car. I need to get some work done on her anyway to get her ready for Auto X next year. and pretty her up.
#19
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,920
Received 2,660 Likes
on
1,884 Posts
rx8 is easier than the FB, mazda really does a good job of making these simple and easy to work on.
the new audi's you need the computer to do the brakes, its electronic
the new audi's you need the computer to do the brakes, its electronic
#20
Wrkn Toyota, Rootn Wankel
Join Date: Sep 2007
Location: "Haystack" Hayward, CA
Posts: 1,642
Likes: 0
Received 1 Like
on
1 Post
'07 Honda Civic, took my co-worker 4+ hours to lift the engine roughly 4 inches to clear a 1/2" piece of the lip on the oilpan from the crossmember when he was replacing it. Needless to say, pain in the *** for an oilpan replacement.
#21
Moderator
iTrader: (3)
easier than the Gen I? i must agree to disagree on this one. everytime i have to touch my car, i curse Mazda for not making it like the FB (or even the FC). even a simple thing like pulling the oil drain plug is an act of contortionism on the bloody Rx-8 whereas on my Rx-7, there were times i didn't even get on the ground! i've had to do MAJOR work to my car in the last few months and for everything i did, i know i could have bloody well stripped an Rx-7 in that amount of time.
#23
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,920
Received 2,660 Likes
on
1,884 Posts
easier than the Gen I? i must agree to disagree on this one. everytime i have to touch my car, i curse Mazda for not making it like the FB (or even the FC). even a simple thing like pulling the oil drain plug is an act of contortionism on the bloody Rx-8 whereas on my Rx-7, there were times i didn't even get on the ground! i've had to do MAJOR work to my car in the last few months and for everything i did, i know i could have bloody well stripped an Rx-7 in that amount of time.
i dunno about the rest, the ENTIRE interior of the rx8 comes out in less than an hour.
#24
dark side i sense in him
Here's why engineers make things hard for the mechanic. The first engineers knew that a mechanic would need to work and replace parts so they spent long hours designing things simple for the mechanic. One night the engineer get home early to find the mechanic in bed with his wife. Now the mechanic spends long hours working while the engineer is home or sleeping with the mechanic's wife