1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

big issue

Thread Tools
 
Search this Thread
 
Old Aug 24, 2015 | 12:56 AM
  #1  
FB_Frank85's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2015
Posts: 9
Likes: 0
From: illinois
big issue

Ok so I have the weirdest issue going on. Today I got the car started with a brand new battery. Tuned the carb to perfect specs. Drove it around Ran perfect! And I'm not gonna lie I beat on it a little, and it took it great. Then I drove it around later last night. Made it to my friends house fine. Then I went to drive it home, and it randomly starts choking out on the road. This happens a lot. I get it running real nice, then when I take it somewhere it randomly stops running. I let it sit for about 20 minutes, then it starts. And then repeat cycle. Why does it do this? Anybody else have this issue?
Reply
Old Aug 24, 2015 | 08:39 AM
  #2  
t_g_farrell's Avatar
Waffles - hmmm good
Tenured Member: 20 Years
Community Favorite
iTrader: (1)
 
Joined: Jul 2004
Posts: 9,227
Likes: 453
From: Lake Wylie, N.C.
First I would suspect the fuel filter is clogging up, otherwise it will take more diagnosing to figure it
out. Fill us in on any details that may help us understand the car. Mods? History? Pics ? (we love pics).
Reply
Old Aug 24, 2015 | 12:13 PM
  #3  
FB_Frank85's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2015
Posts: 9
Likes: 0
From: illinois
Originally Posted by t_g_farrell
First I would suspect the fuel filter is clogging up, otherwise it will take more diagnosing to figure it
out. Fill us in on any details that may help us understand the car. Mods? History? Pics ? (we love pics).
I have a clear fuel filter. Just changed it the other day. I can see that it is full and not clogged. Also when I take the gas lines off the carb and turn the key on a steady stream of gas comes out.

The car is a 1985 GS. It has a 12a. Only mod is the header. I'll post pictures
Reply
Old Aug 24, 2015 | 12:16 PM
  #4  
FB_Frank85's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2015
Posts: 9
Likes: 0
From: illinois



Reply
Old Aug 24, 2015 | 12:45 PM
  #5  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,555
Likes: 1,271
From: Ohio
Sounds like the carb is picking up sediment in the float bowls and trying to suck the sediment through the jets causing the hesitation you describe. Sounds like it may be time for a carb rebuild.

Also check the plugs to ensure you have the correct NGK BR8EQ plugs installed and make sure there is no corrosion and ensure the electrode on each plug is not rounding over. Start there.
Reply
Old Aug 30, 2015 | 03:38 PM
  #6  
NCross's Avatar
I have a rotary addiction
Tenured Member: 15 Years
iTrader: (18)
 
Joined: Jun 2006
Posts: 4,815
Likes: 24
From: Columbia, Tennessee
It could be a bad ignitor since the trouble seems to only happen when hot.
Reply
Old Aug 31, 2015 | 03:31 AM
  #7  
7aull's Avatar
RX HVN
Tenured Member 15 Years
iTrader: (2)
 
Joined: Jan 2003
Posts: 3,889
Likes: 229
From: Arizona
OR-
gas tank innards are shedding rust/gunk into fuel pickup: pump draws gunk into pickup in tank, plugs up pick up or F.FIlter & stalls out. Car sits. Gunk drifts away from pickup. Starts and runs…. rinse, repeat.
Mine did this too, esp if gas tank was ½ or less full. Only fix was drain and pull tank, take to a rad shop for a clean out, then reseal tank inside walls with POR15 Gas tank sealer kit. Done.

Stu
80GS
Alaska
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
doritoloco
New Member RX-7 Technical
7
Sep 5, 2015 12:41 PM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM




All times are GMT -5. The time now is 10:51 AM.