These kits are now in stock and ready to ship.. 210.00 shipped with in the USA and Canada...

here is a link on what started all this for thoes that want to read it...
https://www.rx7club.com/showthread.p...ght=atkins+dan



pay-pal payment can be send to ebay@atkinsrotary.com I will need a PH# along with your forum name.. and a small reminder to what the payment is for...
or for those that want to call in with a CC# that will work too..

If you guys\gals have any Questions please ask away and I will be more than happy to help you out...

Later
Dan Atkins
253-848-7776
__________________

 

well whats it look like? and did you add an idler pulley?

 

That sounds pretty cool. Saw the picture for the 2nd gen. This won't affect the workings of the alternator or water pump, will it? I'm sure it's not an underdrive setup and I've heard many things of people going to underdrive pulleys and their alternator is not charging properly and their water pump is not cooling right, and so on and so forth.

 

here is a link for the 2nd gen kit I will have a photo for the first gen up by Monday...
http://www.atkinsrotary.com/store/cu...cat=456&page=1

This kit is NOT under driven and you will loose the air pump with this kit...


Dan

 

for the stock stuff you wont need an idler....

Dan

 

What if you did and alternator relocation with the pineapple kit?

 

Well I am doing just fine with my V-belt set up like that on the airplane and I made that relocation bracket probley about 2 years before pineapple did there kit...

Dan

 

If I just need the ones for the water pump and crank, and not the alt how much would it be?

Also how wide is the belt?

 

?

 

someone want to fill me in, what would be the purpose of this?

 

ild like to see it on a engine..

 

I found the belt to fit on my second gen. Trial and error. Take a piece of string, wrap it arround all the pullies, and you have a basic measurment.

 

Pix in my compadre's rotary 510. Its been there for over 2 years but I dont remember where he got it from. Not a whole lot of pix but hey...

 

Is that a weber? lol

 

150.00 with a belt... and the belt is the same as what I am useing for the 2nd Gen... the with of the belt is 6 rib...


Dan

 

Awesome, thanks dan!

I should be place an order sometime after the first of the year.

 

No problem just let me know when you are ready..
BTW Matt your fuel tank WILL be leaving today

Dan

 

any response? what does this offer over stock? thanks

 

Any big weight savings? Are the pulleys Alum or steel?

 

Dan I'll pick one up from you but I need to finish spending for Christmas first.

 

No weight savings with this kit.. These are made t6061 Alum...


Dan

 

Yes there is less slipping and you dont have to have the belt as tight and the old V-belt system..

also here is a link to a thread on this kit...

here is a link on what started all this for thoes that want to read it...
https://www.rx7club.com/showthread.p...ight=atkins+dan


Dan

 

No problem just let me know when you have recovered from Christmas...

Dan

 

Ok sounds good, I was worried about it, I knew you werent going any where. lol

I too am recovering from X-mas, so as soon as im caught up ill place my order. Stinks that you got to GIVE gifts to GET gifts lol.

 

I think I remember something in your original thread about being able to keep the AC and power steering. That was on the second gen kits. Will I be able to keep the AC pulley on my '83 GSL?