almost finished with my custom exhaust, need one more piece of help.
02-11-04, 07:15 PM
#1
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Shoreline, Wa
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
almost finished with my custom exhaust, need one more piece of help.
Ok heres the setup so far Streetheader> Presilencer> The stock dual pipe thing> Borla XS
Being a Borla fanboy, i bought the XS for a good deal (straight through SS packing no walls) which should last a LONG time, but i need to know the diameter of the stock dual pipe things. I understand they used to connect before the muffler into one pipe but mine were in the past just cut off, so theirs 2 pipes into a big broken muffler. I need to know what size y-pipe or steps i should buy. The inlet on the muffler is 2 1/2" and IS a dual inlet, single outlet and reversible. SO i need to get both pipes 2 1/2" or into one 2 1/2"
Being a Borla fanboy, i bought the XS for a good deal (straight through SS packing no walls) which should last a LONG time, but i need to know the diameter of the stock dual pipe things. I understand they used to connect before the muffler into one pipe but mine were in the past just cut off, so theirs 2 pipes into a big broken muffler. I need to know what size y-pipe or steps i should buy. The inlet on the muffler is 2 1/2" and IS a dual inlet, single outlet and reversible. SO i need to get both pipes 2 1/2" or into one 2 1/2"
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM