leknaw69

iTrader: (30)

I bougth this car las weekend from perfect7 and was surprised as to how clean it was. I was even more surprised when I noticed it had new tires. The car is rust free and rock solid, and did I mentioned it has new tires? Any way, here are some pics with the engine in. I will try to get it running by Monday if the weather holds.

Zyrano

looks nice, but isn't that a carb?

perfect7

Looks Good!!

leknaw69

iTrader: (30)

Yes indeed, it is a carb. I am putting it together for one of my teenagers and I had to work with what was laying around the garage. A lot of the wiring is cut off so the Fuel injection system will have to wait until I get a good harness.

NoPis10

iTrader: (29)

Looks like you have gotten far on short time...
I was interested in that SE myself but my friends car trailer was stolen a month ago and I couldn't make arangements to pick her up. Nice to see she will be running soon. Also, if you need I have a complete lower and upper manifold for the SE motor. I also have the wiring harness and computer, A/C compressor, fanclutch with fan, and other misc stuff. If you need anything email me at lwnslw@aol.com and I can give you a very good deal of the stuff as I no longer need any of it, I'm installing a carburated TII motor into my SE.
L8R Joe

leknaw69

iTrader: (30)

I did all the work yesterday. Today I am installing the radiator and brakes. Got a set of real nice rotors and new pads on the deal as well. I have everything I need to make it fuell injected execpt a good harness. Will post more pictures at the end of the day.

z-beater

Car is looking great...mmm 3pc wing

gerbraldy

IT'S DOING A WHEELIE OMG!! Nice car, love the wing on the back it's freakin hot.

NoPis10

iTrader: (29)

I have a 3pc wing just like that 4 sale if anyone is interested. It came from my 1st gen SE and is painted black. Looking for $100 plus shipping. If interested you can email me at lwnslw@aol.com
L8R Joe

leknaw69

iTrader: (30)

I did some more work today, not as much as yesterday but some indeed. I mounted a three row radiator out of a REPU. Had a hell of a time finding hoses that would fit, but gotten anyway. Mounted the front brakes and lines and mounted the exhaust manifold. Tomorrow I should finish the rear brakes and complete the exhaust up to the rear end. (waiting on muffler). I hoping I can started sometime tomorrow. We'll see.

brandon davis

iTrader: (3)

I love projects like yours. How much was the car?

leknaw69

iTrader: (30)

So far I have invested $619 dollars. $600 for the car and $19 for the readiator hoses. Of course I have invested about a weekend on it as well. I do al my work at home and do keep the family involve. Perfect7 facilitated a rebuild kit for all four calipers and new pads. Everything else I already had, engine, tranny, carbs and the whole FI setup for whenever I go back to FI.

dbragg

iTrader: (7)

if youre in need of a muffler and wiring harness i have both on my parts GSLSE. the muffler is off and i was about to get it blasted and painted with a high heat black paint, but as for the harness. its still on the car and i was planning on sending that along with other good prts to the junkyard since no one is interested. if you want the wiring harness, tell me the easies to get it off and ill sale it to you for dirt cheap. and for the muffler, if youre interested, ill sale it to you as is, or for a little more after it gets blasted and painted, your choice.

leknaw69

iTrader: (30)

The harness is hard to take out. You have to take the dash out in order to get the whole thing out. There were enough cables to get power to most everywere. Today I will figure ou waht wires go to the alternator from the right side. I also need to figure out how to place a fuseble link for the computer since that got cut off. I have the fuseble link for the main and the lights, but not the one for the computer.

leknaw69

iTrader: (30)

I replace the fuseable links today and finally got power to the coils. WIll replace battery tomorrow and finish the rear brakes.

z-beater

Hey links are not able to be opened??? looking good nice work!

leknaw69

iTrader: (30)

Made the pictures too small will repost tomorrow. Thanks...

leknaw69

iTrader: (30)

Got the car started today after I got back from work. Hook up the wire to the alt and plced a good battery in it and brrooomm... Here are some pics.

Rotaryhaven

iTrader: (17)

Hey Leknaw,
Long time no hear. I got that wiring harness. I have more stuff.