rotarydankus again

here it is

Gregs

that **** does not work
-greg

rotarydankus again

'ere

rotarydankus again

dude its a joke man! its timefor my meds

seanrot

iTrader: (2)

I have seen under your hood, I wouldn't be one bit surprised if I saw a picture of the leaf blower stuck in there.

rotarydankus again

just for the record im hard wiring my mods cause im satisfied , moving batt to cargo bin behind pass, and painting doing rats rite now, will be better, ps id have to have 3) leaf blowers on my seven, i can hide them under front bumber now cause of dankus cold air intake

Rx7carl

What about the 11 yr old with the ether? Where you gonna hide him? Drivers side bin?

seanrot

iTrader: (2)

I do have to admit though. I love the batman fan you got in the engine bay. That thing looks like you found the batmobile in the junkyard.

Sterling

Some guys'll do anything to get blown.

O 16581 72452 5

I tried the leaf blower thing, i got boost leak out the seams of the leaf blower. I couldn't find a place to put it so i could close my hood either.

I should clarify it wasn't a serious installation, merely a "myth buster" expirement.

wagondriver69

Idk I think you could mount the leaf blower in the hatch, and have an intricate system of ducting into the engine bay, if the leaf blower is gas powered you could run a sperate line off of the engine fuel line, and an exhaust pipe out of the hatch also....

rotarydankus again

damn thats scary, actually creativly speeking i think theres room for two under thje front of bumber which conveniently is where the airfilter is now huh,

btw the fan is from a supercuope ford tbird 89-96, or cougar xr789and 90 only, mine was 90, and any thing with the rx7 xr7 has to be cool.any way the fan rocks, 2 speed , literally fits rad perfactly, and was desighned to co 240 horse and 320 torque, good fan

ray green

iTrader: (14)

Jeez Dankus I thought you were serious. I'm still trying to figure out how to get my hood closed.
Ray

high-RPM

are there any power gains at all??

and wouldnt the engine bay heat **** with the plastic / workings of the blower ??

hiboost7

take the motor and stuff and make a custom piping to the intake and mount the blower motor somewhere under the front bumper. and if its electric run it off a switch and get a better battery. you'll sound like a mack passing everyone and people will be asking you to honk for them.

elvisjer

I had a 1989 Chevy S-10 blazer 4.3 v6 supercharged with an electric leaf blower. I had it wired through a power converter and totally sealed with pounds of duct tape. after putting in bigger throttle body jets so the mix wouldnt be too lean, the car had a definate boost. I wired a switch up for on/off and it was awesome. With my mods the car was 0-60 in 7.3 w/o boost. With boost it was o-60 in 6.9. Thats proof. Tested with a stat tester.

rotarydankus again

bigger throttle body jets?

85rotarypower

In theory it should work. A general leaf blower pumps out about 400-500 CFM of air. The carb is a 400 CFM stock is it not? So, saying that Mazda left some breathing room in the carb, the engine takes in 350 CFM of air at 7000rpm. So, in theory, even if you only get 50 CFM of air extra into the engine, you would get approximately a 14% increase in power.

This is in no way technical, and all the numbers are just out of my head. So this may or may not be true, but if what elvisjer said is true, then this theory could also be true.

ray green

iTrader: (14)

Yeh but you have to ride with the hood up. This was not one of Dankus' best ideas.

85rotarypower

He was joking after all. Its just a theory, but if you could get a leaf blower under the hood, it should work.

XLR8

iTrader: (52)

Rotary engines are wonderful free flowing air pumps. Often, these electric superchargers do not have the volume to creat actual boost. Personally, I wouldn't waist my time with this crap. If you want boost, get serious and make it!! Otherwise, I would spend my time and money on useful parts for my car....

my .02

rotarydankus again

remember guys it was supposed to be a joke! but just for the record ray , ive got my intake plumbed out in front of the radiator, so they wouldnt be "under the hood" they would be behind the front bumber, i think theres room for two, and why woudnt they suck start from the air moving through to carb , wire the throttles open on both blowersand hook a switch up to activate leaf blowers at WOT , wait wait wait gotta let this go!

ray green

iTrader: (14)

I had you covered from the get go on that one trevor. Afterall, if you were serious, you'd be replacing the 12A with a set of leaf blowers hooked directly to the tranny for a significant horsepower boost.
Ray

rotarydankus again

seriously ray ive actually got a manifold under construction to mount a eaton m90 off of supercoupe, im working on a used eng mounted to my work bench next to my tool box, ive got two friends that ar sheet metal fabricaters by professon and are pushin me along, im thinkin of how to inject it now, anyway this mod would render the leafblower mod obselete. and carl
not to advocate pot use , just couldnt resist, ps, if it was legal and alcahol wasnt I believe the domestic violence and needless alcahol induced accidents would decline dramaticly, ever heard of anyone smokin a blunt then beating there wife and kids? but it will never happen , because fighting and proventing substance abuse is big business , one of the biggest. cant be elimnating a source of income from the bush big business machine