Alrighty,here's the deal guys, as the title states i have a question or 2 about the 4x114 swap.

I know just about every bit of the details,but after searching and searching I can't find an answer.

Will the 4x114 hub/rotors fit AND work with the 4x110 spindle and calipers?

4x110
http://info.rockauto.com/getimage/ge...c/12045011.jpg

4x114
http://info.rockauto.com/getimage/ge...c/12045012.jpg

Hope someone can clear this up for me

 

Spindle and bearings are the same for all 84-85. Calipers, caliper mounting bracket, backing plates and rotors are 12A/13B specific.

 

Thanks for clearing that up,but i still wonder if there is a way to make it work with the 12a's parts.

Anyways.....

Thanks again for the help

 

Rotors are different size. The caliper brackets from a 12A would not position the 12A calipers in the right place on the 13B rotors. You could always have a 12A hub drilled and press in 13B studs. Nothing is impossible. You might be able to make your own caliper brackets. Used 13B brake parts are probably the easiest, cheapest option.