2gdfi and hei mod
#1
Hopeless
Thread Starter
Join Date: Aug 2004
Location: Nanaimo BC
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
2gdfi and hei mod
Has any one thought of doing this or done this at all?
Literally just using the 2gdfi as well as the HEI igtnition module as the ignitor.
Im thinking of doing this, but im just wondering if anyone has tried it, and what the results were.
Literally just using the 2gdfi as well as the HEI igtnition module as the ignitor.
Im thinking of doing this, but im just wondering if anyone has tried it, and what the results were.
#2
Can You Wankel?
iTrader: (12)
What is the HEI igtnition module? Do you have a link? If its like the MSD box then I think Kim'sfb just did a write up using the 2nd gen coil for the 2GCDFIS w/ MSD set up. Link below
https://www.rx7club.com/1st-generation-specific-1979-1985-18/check-out-my-2gcdfis-w-msd-set-up-503781/
https://www.rx7club.com/1st-generation-specific-1979-1985-18/check-out-my-2gcdfis-w-msd-set-up-503781/
#3
Hopeless
Thread Starter
Join Date: Aug 2004
Location: Nanaimo BC
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
The HEI module is just an intion module out of like a corvette ( there is a couple of years that you can use, not to sure what they are off the top of my head) They have a link in the FAQ. and it serves as a replacement for ignitors, hella cheaper to then new ignitors 40 bux cdn. You just rewire them and there ya have it. As for the benifits or draw backs im not totally sure. gonna find out soon though.
Thread
Thread Starter
Forum
Replies
Last Post
demetlaw
3rd Generation Specific (1993-2002)
6
10-02-15 06:22 PM