1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

1st gen smoking problem

Thread Tools
 
Search this Thread
 
Old 01-25-24, 08:30 PM
  #1  
Full Member
Thread Starter
 
mateobgallo's Avatar
 
Join Date: May 2023
Location: California
Posts: 79
Received 4 Likes on 2 Posts
1st gen smoking problem

Hey all, I recently have been having a lot of smoke coming from my car. I have 2 suspicions. I replaced my thermostat and started seeing the smoke. But around the same time I started premixing. I decided to look at the cooling system first. I ordered a new thermostat, thermostat housing, gasket, (and used sealer on gasket) and radiator hoses. After all of this the smoke still comes. The smoke does not appear when the car is driving or stopped at a stop sign, only when the car is off. I did a test to confirm this. I went for a drive and pulled into my garage, no smoke while running. However as soon as I turn it off smoke appears from airbox and the thermal reactor. Could this be the result of adding too much premix? It smells like coolant but I am new to using premix so I have no idea what it smells like.

Any help would be appreciated.

Smoke emanating from air box- taken from video that’s why it’s shaky
Old 01-26-24, 10:54 AM
  #2  
Out In the Barn


iTrader: (9)
 
KansasCityREPU's Avatar
 
Join Date: Mar 2005
Location: KC
Posts: 6,055
Received 1,015 Likes on 801 Posts
Take the air box off and do teh same test and you'll be able to see exactly where it is coming from.
Old 01-26-24, 07:41 PM
  #3  
84SE-EGI helpy-helperton

 
LongDuck's Avatar
 
Join Date: Oct 2002
Location: Phoenix, AZ
Posts: 3,314
Received 359 Likes on 250 Posts
Your intake manifold O-rings are leaking. Not the gasket, the 2× O-rings which route engine block coolant through the intake manifold to help with fuel atomization. Lots of guys install freeze plugs into those ports after coating with silicone sealant. It's a common failure point with Series2 cars.
Old 01-29-24, 03:51 AM
  #4  
Junior Member
 
rftahrs's Avatar
 
Join Date: Mar 2020
Location: Oatley
Posts: 23
Received 1 Like on 1 Post
Originally Posted by mateobgallo
Hey all, I recently have been having a lot of smoke coming from my car. I have 2 suspicions. I replaced my thermostat and started seeing the smoke. But around the same time I started premixing. I decided to look at the cooling system first. I ordered a new thermostat, thermostat housing, gasket, (and used sealer on gasket) and radiator hoses. After all of this the smoke still comes. The smoke does not appear when the car is driving or stopped at a stop sign, only when the car is off. I did a test to confirm this. I went for a drive and pulled into my garage, no smoke while running. However as soon as I turn it off smoke appears from airbox and the thermal reactor. Could this be the result of adding too much premix? It smells like coolant but I am new to using premix so I have no idea what it smells like.

Any help would be appreciated.

Smoke emanating from air box- taken from video that’s why it’s shaky
It could be leaking coolant.

The intake manifold is part of a coolant circuit, and has two o-rings wedged between it and the engine block. They wear, and when they wear, coolant seeps into the combustion chamber which burns the coolant. This is just one possibility, and I'm mentioning it since white smoke is coming out of your air filter, as did mine.

Are there any coolant leaks in and around the intake manifold? A coolant pressure test could help.

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
moe_jr
3rd Generation Specific (1993-2002)
2
03-15-04 10:57 PM
Vette454
3rd Generation Specific (1993-2002)
4
02-22-04 07:01 PM
deltr0n`
2nd Generation Specific (1986-1992)
1
05-17-03 12:50 PM



Quick Reply: 1st gen smoking problem



All times are GMT -5. The time now is 02:19 PM.