1st GEN FB RHD RX7 Manual to Power steering conversion
#1
Junior Member
Thread Starter
Join Date: Oct 2011
Location: Lahore, Pakistan.
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
1st GEN FB RHD RX7 Manual to Power steering conversion
Hi guys,
I'm new here and on behalf of a good friend. His car is completely original and very rare in Pakistan.
The car in question is a 1982 FB RHD RX7 with a manual steering box.
I've got most of the items and now I'm looking for a control valve with or without lines.. can any one please help me?
Regarding the PS pump, I found some but I intend to use an electronic one or as the situations calls for.. first I need the column, box, CPU and control valve infront of me before moving any further... :p
Can someone please help me source the items needed, specially the power steering gearbox for RHD FB RX7s?
some people also suggested an 'RE-SPEED' FC rack and pinion conversion kit, please also let me know if that is available for RHD vehicles or not?
Regards
sync
I'm new here and on behalf of a good friend. His car is completely original and very rare in Pakistan.
The car in question is a 1982 FB RHD RX7 with a manual steering box.
I've got most of the items and now I'm looking for a control valve with or without lines.. can any one please help me?
Regarding the PS pump, I found some but I intend to use an electronic one or as the situations calls for.. first I need the column, box, CPU and control valve infront of me before moving any further... :p
Can someone please help me source the items needed, specially the power steering gearbox for RHD FB RX7s?
some people also suggested an 'RE-SPEED' FC rack and pinion conversion kit, please also let me know if that is available for RHD vehicles or not?
Regards
sync
#2
Eats, Sleeps, Dreams Rotary
iTrader: (17)
Welcome! Check out the Far east forum, Australian/New Zealand, and European sub forums. You'll have better luck with parts there with the RHD cars.
I dont know about the re-speed rack and pinion for RHD. Pretty sure they're just for LHD cars and one for v8 conversions.
Maybe try the ausrotary forum too for parts. Good luck! Got any pics of the car?
I dont know about the re-speed rack and pinion for RHD. Pretty sure they're just for LHD cars and one for v8 conversions.
Maybe try the ausrotary forum too for parts. Good luck! Got any pics of the car?
#3
Junior Member
Thread Starter
Join Date: Oct 2011
Location: Lahore, Pakistan.
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Don't have any pics right now, I have just seen the car once - will go again look thoroughly and will take pics as well from a shitty BB :P
and oh should I be creating threads in all of those sections...wouldn't it be considered as spam?
and oh should I be creating threads in all of those sections...wouldn't it be considered as spam?
Thread
Thread Starter
Forum
Replies
Last Post
LunchboxCritter
2nd Generation Specific (1986-1992)
15
01-03-16 04:11 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
JIMMY54
1st Generation Specific (1979-1985)
2
08-12-15 05:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM