1st gen body parts
#1
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Fort Wayne, IN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
1st gen body parts
I am looking for a new front end for my gold 81 gsl. I need a hood, the panel between the front bumper and hood, front bumper, fenders, and the front end core support piece that the radiator duct bolts onto. If anybody has any of these body parts in gold that would be awesome but it doesn't have to be gold. Please let me know what you guys have.
nick.church7@hotmail.com
nick.church7@hotmail.com
Last edited by iamhighrx7; 10-25-14 at 01:35 PM. Reason: Typo
#3
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Fort Wayne, IN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
#5
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,841
Received 2,605 Likes
on
1,848 Posts
Mazda has the fenders, which only list for about $100, the panel between the headlights, headlight lids, and you can probably still get a bumper out of em. the bumpers are huge money, i think supply is limited.
hoods are NLA new.
hoods are NLA new.
#6
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Fort Wayne, IN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Thanks I will check with them tomorrow. What does NLA mean? Not a Large Amount? Not Locally Available? I was looking to go a cheaper route and find the stuff from somebody that has it layin around.
Trending Topics
#9
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Fort Wayne, IN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I called my local dealership and was told I can't get my hands on these parts anymore. I asked if they had some at a nearby dealership and I was told there was no point in trying because I'm not going to find anything. So if anybody has these parts laying around please let me know. Thanks
#10
Full Member
Join Date: Oct 2014
Location: Smithfield, UT
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
There's a salvage yard that has a gold '83 with a good front bumper, I took the hood, the RF fender looked fine, IIRC AutoWreckingPartsLLC.net : Inventory : Mazda
The '84 is black with red interior, they also have a blue '85 in rough shape. The parts should be affordable, but labor and shipping may kill the deal for ya.
The '84 is black with red interior, they also have a blue '85 in rough shape. The parts should be affordable, but labor and shipping may kill the deal for ya.
#11
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,841
Received 2,605 Likes
on
1,848 Posts
I called my local dealership and was told I can't get my hands on these parts anymore. I asked if they had some at a nearby dealership and I was told there was no point in trying because I'm not going to find anything. So if anybody has these parts laying around please let me know. Thanks
fenders are available, header panel is NLA. they have 1 front bumper, its $750 list!
fender part numbers are FA01-52-111D for the right and FA01-52-211D for the left.
#12
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Fort Wayne, IN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
There's a salvage yard that has a gold '83 with a good front bumper, I took the hood, the RF fender looked fine, IIRC AutoWreckingPartsLLC.net : Inventory : Mazda
The '84 is black with red interior, they also have a blue '85 in rough shape. The parts should be affordable, but labor and shipping may kill the deal for ya.
The '84 is black with red interior, they also have a blue '85 in rough shape. The parts should be affordable, but labor and shipping may kill the deal for ya.
Thanks for the lead. Will follow up on it.
#14
Doritos & Dual Sports
iTrader: (8)
I am looking for a new front end for my gold 81 gsl. I need a hood, the panel between the front bumper and hood, front bumper, fenders, and the front end core support piece that the radiator duct bolts onto. If anybody has any of these body parts in gold that would be awesome but it doesn't have to be gold. Please let me know what you guys have.
nick.church7@hotmail.com
nick.church7@hotmail.com
front bumper
front end core support piece that the radiator duct bolts onto
hi, i have that^
have you been poking around the FS section? aha parting out a 84GSL
I have fenders too, but the bottoms of the rear of them are rotted and you wouldnt want them (you might want the RX-7 badges off of them though! LMK)
I can do $70 + shipping (or $75 if you want the rx-7 badges, no guarantee the nipples will all be on the back)
for all of that i listed
PM me with a cell # or email and i can send you pics
#15
Full Member
iTrader: (2)
Found the left fender brand new at an extremely good price.... Around $105. What do you thing?
Found it at Quirk Auto Parts | OEM & Aftermarket Car, Truck, SUV, & Van Parts and Accessories using the part number above...
Found it at Quirk Auto Parts | OEM & Aftermarket Car, Truck, SUV, & Van Parts and Accessories using the part number above...
#16
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,841
Received 2,605 Likes
on
1,848 Posts
Found the left fender brand new at an extremely good price.... Around $105. What do you thing?
Found it at Quirk Auto Parts | OEM & Aftermarket Car, Truck, SUV, & Van Parts and Accessories using the part number above...
Found it at Quirk Auto Parts | OEM & Aftermarket Car, Truck, SUV, & Van Parts and Accessories using the part number above...
#17
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Fort Wayne, IN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Found the left fender brand new at an extremely good price.... Around $105. What do you thing?
Found it at Quirk Auto Parts | OEM & Aftermarket Car, Truck, SUV, & Van Parts and Accessories using the part number above...
Found it at Quirk Auto Parts | OEM & Aftermarket Car, Truck, SUV, & Van Parts and Accessories using the part number above...
#18
Senior Member
Join Date: Jul 2013
Location: South Beach
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
might as well make a customized fiberglass bumper at the costs coming up...
Thread
Thread Starter
Forum
Replies
Last Post
craaaazzy
Comments and Suggestions Archive
3
08-21-15 02:00 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM