1st gen 3rd gen rx7
#1
Newbie
Thread Starter
Join Date: Jul 2007
Location: Grand Rapids,Mi
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
1st gen 3rd gen rx7
Would a body kit off of a 3rd gen rx7 to the body of a 1st gen Rx7 can anyone answer this for me Im still fresh in the hyping up a 1st gen rx7
#5
Newbie
Thread Starter
Join Date: Jul 2007
Location: Grand Rapids,Mi
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys thanks for the advice. It was just a thought. I plan on getting a body kit for it but just not sure on how to make it look like the same 1st gen with a killer look not that it dont look good now. thanks for all the advice D1Racer
#6
Newbie
Thread Starter
Join Date: Jul 2007
Location: Grand Rapids,Mi
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Ok Ive got another question keep in mind guys its my first Rx7 So bare with me. I was thinking of taking out all the emissions on my 1st gen would I hurt anything by doing that or should I leave it alone
#7
Stu-Tron Get Yo Groove On
iTrader: (4)
You wouldn't hurt anything but the environment. Search the forums for your answers, all the questions you have been asking have been covered many times before. Search the archives, they have a pictorial for the SA's emissions removal. Search for "Rat's Nest", that should yield tons of threads.
Trending Topics
#8
Old Fart Young at Heart
iTrader: (6)
Since you're new, welcome to the forum and the Darkside. From reading your previous posts, I see that you need to do some of the basics that each new member should do. Start with reading through the FAQs at the beginning of the 1st gen forum, move on to the archives for reading some of the best threads out of our 1000+ pages that we have acquired so far. Last 2 items, download the FSMs, carb manual and whatever other rotary related reading you find interesting in the link provided in my sig and then learn how to use the search engine before you start a new thread.
After reading and searching, if you can't find the answer you're looking for, then by all means post your question.
.
.
.
.
.
.
.
After reading and searching, if you can't find the answer you're looking for, then by all means post your question.
.
.
.
.
.
.
.
#9
Lives on the Forum
Hey, a new member to the flock...
You just happen to be living in the unofficial RX7 capital of the world. We've got a good group in GR/Holland, so we'll take good care of you. If you want to meet all of the guys, we'll be racing at Grand Valley University this weekend (Sat/Sun).
Also, check this out if you haven't yet: http://mirotaryclub.net/forum/
What hours do you normally work, and what branch?
You just happen to be living in the unofficial RX7 capital of the world. We've got a good group in GR/Holland, so we'll take good care of you. If you want to meet all of the guys, we'll be racing at Grand Valley University this weekend (Sat/Sun).
Also, check this out if you haven't yet: http://mirotaryclub.net/forum/
What hours do you normally work, and what branch?
Thread
Thread Starter
Forum
Replies
Last Post
craaaazzy
Comments and Suggestions Archive
3
08-21-15 02:00 PM