12a turbo?
#4
Banned. I got OWNED!!!
#6
#!/sup_mod/üb3rg33k
Join Date: Sep 2001
Location: Kansas City
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
<-- I will be doing a 12a turbo shortly. Already ordered parts just waiting for them to come in. It will be going on my '83 GSL
-Error402
-Error402
Last edited by error402; 01-15-03 at 08:48 AM.
Trending Topics
#8
Racingbeat dealer
Join Date: Dec 2002
Location: Uden (AFB Volkel), The Netherlands
Posts: 787
Likes: 0
Received 1 Like
on
1 Post
No, I haven't done this conversion.... Mazda did that for me... I've got an 12A Elford Turbo These were stock sold by Mazda UK . An crazy dealer in the UK developed this setup and Mazda approved the setup...
Only 500 of them were sold.
But I've got one
180 HP stock 12A
But I'm currently reparing the engine after an Apex broken...
So I'll be following the discussion
Greetz
Only 500 of them were sold.
But I've got one
180 HP stock 12A
But I'm currently reparing the engine after an Apex broken...
So I'll be following the discussion
Greetz
#11
Gone Race'n
iTrader: (4)
Join Date: Dec 2001
Location: Rockford, IL
Posts: 1,544
Likes: 0
Received 0 Likes
on
0 Posts
I did this write up so that people would have the oportunity to see the amount of work involved in turbo charging a 12a.
Since this is archived I can not update the thread with new info. So I will take this as an oportunity to "update" the masses.
A new bonnet has been fabricated for the carb and has cured my driveability issues. I have also welded the distributor and set the timing to 15deg leading and 7deg trailing. I am running a Mikuni side draft still with the main jet drilled out to a 285 (2.85mm) I am running only 5psi still until I get to a dyno with a wide band.
As always if you have questions just shoot me an e-mail moremazda@yahoo.com.
Ryan
Since this is archived I can not update the thread with new info. So I will take this as an oportunity to "update" the masses.
A new bonnet has been fabricated for the carb and has cured my driveability issues. I have also welded the distributor and set the timing to 15deg leading and 7deg trailing. I am running a Mikuni side draft still with the main jet drilled out to a 285 (2.85mm) I am running only 5psi still until I get to a dyno with a wide band.
As always if you have questions just shoot me an e-mail moremazda@yahoo.com.
Ryan
#14
Banned. I got OWNED!!!
i know Directfreak has a 13B , his pictures are everywhere!!!! im talking about his buddies 12a turbo.... the silver one!!! you guys know wich one!
Directferak , i think your buddy and i should race ,, just for fun, and winner crowned 12a turbo STREET car champion???/ what do you think?? can you make it happen??
Directferak , i think your buddy and i should race ,, just for fun, and winner crowned 12a turbo STREET car champion???/ what do you think?? can you make it happen??
Thread
Thread Starter
Forum
Replies
Last Post