Solutions for a dead fan clutch on an SA
06-07-20, 01:42 AM
#1
Junior Member
Thread Starter
Dead fan clutch on an SA
My fan clutch isn’t turning right and squealing at high rpm so I need to replace it. Unfortunately the part is NLA. Please don’t suggest an electric fan....I want to keep it stock. Has anyone rebuilt one of these? Are there any fan clutches for other makes or models that might fit?
Neil
79 GS
Neil
79 GS
Last edited by TheEdge; 06-08-20 at 12:19 AM. Reason: Incorrect title
06-08-20, 05:45 AM
#2
I would post a want to buy ad here on the forum in the 1st gen classifieds section and see if anyone out there has one available.
With that said, ensure you have proper belt tension and that the belt is not slipping on the water pump or alternator pulleys. A slipping and or worn belt will cause a squealing noise at higher rpm and when the belt slips, the fan will not be turning properly.
With that said, ensure you have proper belt tension and that the belt is not slipping on the water pump or alternator pulleys. A slipping and or worn belt will cause a squealing noise at higher rpm and when the belt slips, the fan will not be turning properly.
Thread
Thread Starter
Forum
Replies
Last Post
Dan H
1st Generation Specific (1979-1985)
3
03-16-05 07:24 AM