So im trying to adjust the tps by the shop manual. Tested the tps with an ohm meter, and it is working properly. I made the test light. Tested it on the battery so I know it works. Following the correct procedure from the book. Checking from the green clip by the air box I am getting no lights no matter how I adjust the screw. Not sure if this helps but with a test light there is power going to all wires from the green clip. Anyone know where to go from here?

 

i would either unbolt the TPS or open the throttle by hand, and push the plunger in manually, and see if there is a spot where only 1 light is on. if yes, then its working properly, and you just need to find the adjustment, if no, then TPS is most likely borked.
i should point out that the engine needs to be warn to adjust the TPS, the cold idle thing works by opening the throttle