Enkei Classics on TireRack
05-01-11, 10:22 PM
#3
Senior Member
Join Date: Feb 2005
Location: Parsons, KS
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
05-02-11, 04:54 PM
#8
Senior Member
iTrader: (5)
Join Date: Apr 2007
Location: Dallas, TX
Posts: 441
Likes: 0
Received 0 Likes
on
0 Posts
Enkei has yet to release any of their Classics line in a 4x110. Every time JNC gets all a flutter over new rims from Enkei I bitch about just this. No Old School Mazda love.
05-04-11, 12:00 AM
#11
Full Member
iTrader: (1)
Join Date: Sep 2010
Location: So Cal
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
They were released at the end of March this year. I have them on my SE. 15 x 7 in the front + 38 with a 15mm spacer and 15 x 8 in the rear + 25. These are the only sizes and offsets they are sold in.
Retail is $190 for the 15 x 7 and $210 for the 15 x 8's. You can find them for less than retail at numerous places.
A lot of the Miata guys are buying them in the 15 x 8 sizes.
http://www.enkei.com/enkei92.html#
http://www.enkei.com/size_chart/ENKEI92.pdf
Retail is $190 for the 15 x 7 and $210 for the 15 x 8's. You can find them for less than retail at numerous places.
A lot of the Miata guys are buying them in the 15 x 8 sizes.
http://www.enkei.com/enkei92.html#
http://www.enkei.com/size_chart/ENKEI92.pdf
05-05-11, 01:23 AM
#14
Full Member
iTrader: (1)
Join Date: Sep 2010
Location: So Cal
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=Stevan;10603780][QUOTE=N54MPower;10603744] I have them on my SE. 15 x 7 in the front + 38 with a 15mm spacer and 15 x 8 in the rear + 25.
Photos of this setup on your car please..
Ask and you shall receive.
For anyone with an SE or SE suspension these are a relative bargain for new wheels compared to the price of used ones. There isn't a wide range of offsets but they can be made to work on the GSL SE with a spacer.
The car is lowered on RE Speed Race coilovers, Racing Beat roll center adjusters, ST front sway bar with front and rear Tokico Illuminas.
Photos of this setup on your car please..
For anyone with an SE or SE suspension these are a relative bargain for new wheels compared to the price of used ones. There isn't a wide range of offsets but they can be made to work on the GSL SE with a spacer.
The car is lowered on RE Speed Race coilovers, Racing Beat roll center adjusters, ST front sway bar with front and rear Tokico Illuminas.
Last edited by N54MPower; 05-05-11 at 01:26 AM.
05-05-11, 07:59 AM
#15
common sense prevails....
iTrader: (7)
Join Date: Jul 2008
Location: Chino and Lake Arrowhead Calif
Posts: 1,669
Likes: 0
Received 9 Likes
on
9 Posts
[QUOTE=N54MPower;10605571][QUOTE=Stevan;10603780]
mmmmm..... those do look good on your car!!
I have them on my SE. 15 x 7 in the front + 38 with a 15mm spacer and 15 x 8 in the rear + 25.
Ask and you shall receive.
For anyone with an SE or SE suspension these are a relative bargain for new wheels compared to the price of used ones. There isn't a wide range of offsets but they can be made to work on the GSL SE with a spacer.
The car is lowered on RE Speed Race coilovers, Racing Beat roll center adjusters, ST front sway bar with front and rear Tokico Illuminas.
Ask and you shall receive.
For anyone with an SE or SE suspension these are a relative bargain for new wheels compared to the price of used ones. There isn't a wide range of offsets but they can be made to work on the GSL SE with a spacer.
The car is lowered on RE Speed Race coilovers, Racing Beat roll center adjusters, ST front sway bar with front and rear Tokico Illuminas.
^
05-06-11, 08:12 AM
#19
Okay guys,
I started a petition to get these made in a 4x110mm bolt pattern. Please visit the link below and SIGN THE PETITION!
http://www.ipetitions.com/petition/enkei92/
Thanks,
Jamie
I started a petition to get these made in a 4x110mm bolt pattern. Please visit the link below and SIGN THE PETITION!
http://www.ipetitions.com/petition/enkei92/
Thanks,
Jamie
05-06-11, 10:22 AM
#20
Okay guys,
I started a petition to get these made in a 4x110mm bolt pattern. Please visit the link below and SIGN THE PETITION!
http://www.ipetitions.com/petition/enkei92/
Thanks,
Jamie
I started a petition to get these made in a 4x110mm bolt pattern. Please visit the link below and SIGN THE PETITION!
http://www.ipetitions.com/petition/enkei92/
Thanks,
Jamie
05-06-11, 10:32 AM
#21
My hope is that it will show them the level of interest in a 4x110 mesh wheel. If we get enough signatures I'm going to contact Enkei and send them the petition. Maybe then they will offer a 4x110 pattern for us. I believe that this is pretty much what happened with the Konig Rewinds that a lot of people have now. They weren't making them in 4x110 until enough people complained, then they finally decided to manufacture them.
It really can't be that much extra work for them. They probably just have to reprogram a CNC machine somewhere to drill the holes in different spots. The main thing is that they don't want to make a bunch of wheels that they can't sell. So we need to show them that they will sell. So start making them!
Tell your friends!
Jamie
It really can't be that much extra work for them. They probably just have to reprogram a CNC machine somewhere to drill the holes in different spots. The main thing is that they don't want to make a bunch of wheels that they can't sell. So we need to show them that they will sell. So start making them!
Tell your friends!
Jamie
05-15-11, 05:39 PM
#25
Full Member
iTrader: (1)
Join Date: Sep 2010
Location: So Cal
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
I think they are very reasonable and a great option for anyone that doesn't want to look around for a set of wheels that are period correct (except for the center cap) aren't 15 years old and need to be restored .