Enkei Classics on TireRack
 

Here is the link:

http://www.tirerack.com/wheels/enkei-classic-wheels.jsp

No 4x110 yet. Start requesting them folks.

Not even 4x114.3

http://www.enkei.com/size_chart/ENKEI92.pdf

Link to spec chart

4X114 but no 110's :(

Nice! I dont see a price?

I am not sure I want to. I am betting 225 a piece.

May not be available yet.

Kind of sweet and sour, the more people that have meshes the less special they will be.

+1

Enkei has yet to release any of their Classics line in a 4x110. Every time JNC gets all a flutter over new rims from Enkei I bitch about just this. No Old School Mazda love.

We need to start a petition and send it to them.

I like Autobahns better, but these are nice as well, wouldn't mind a pair for the right price.

They were released at the end of March this year. I have them on my SE. 15 x 7 in the front + 38 with a 15mm spacer and 15 x 8 in the rear + 25. These are the only sizes and offsets they are sold in.

Retail is $190 for the 15 x 7 and $210 for the 15 x 8's. You can find them for less than retail at numerous places.

A lot of the Miata guys are buying them in the 15 x 8 sizes.

http://www.enkei.com/enkei92.html#

http://www.enkei.com/size_chart/ENKEI92.pdf

[QUOTE=N54MPower;10603744] I have them on my SE. 15 x 7 in the front + 38 with a 15mm spacer and 15 x 8 in the rear + 25. [QUOTE]


Photos of this setup on your car please..

I'll stick with my Panasports that DO come in a 110 spacing!

http://i378.photobucket.com/albums/o...7/P1050380.jpg

[QUOTE=Stevan;10603780][QUOTE=N54MPower;10603744] I have them on my SE. 15 x 7 in the front + 38 with a 15mm spacer and 15 x 8 in the rear + 25. Ask and you shall receive.

For anyone with an SE or SE suspension these are a relative bargain for new wheels compared to the price of used ones. There isn't a wide range of offsets but they can be made to work on the GSL SE with a spacer.

The car is lowered on RE Speed Race coilovers, Racing Beat roll center adjusters, ST front sway bar with front and rear Tokico Illuminas.

http://i8.photobucket.com/albums/a32/20VBora/RX71.jpg
http://i8.photobucket.com/albums/a32/20VBora/RX74.jpg
http://i8.photobucket.com/albums/a32/20VBora/RX73.jpg
http://i8.photobucket.com/albums/a32/20VBora/RX75.jpg

[QUOTE=N54MPower;10605571][QUOTE=Stevan;10603780]mmmmm..... those do look good on your car!!

^:nod::icon_tup:^

Thanks, I'm pretty sure those photos will convince a friend to pull the trigger on those wheels ;)

Looking sharp!

Okay guys,

I started a petition to get these made in a 4x110mm bolt pattern. Please visit the link below and SIGN THE PETITION!

http://www.ipetitions.com/petition/enkei92/

Thanks,
Jamie

What is this going to do? I signed it anyway.

My hope is that it will show them the level of interest in a 4x110 mesh wheel. If we get enough signatures I'm going to contact Enkei and send them the petition. Maybe then they will offer a 4x110 pattern for us. I believe that this is pretty much what happened with the Konig Rewinds that a lot of people have now. They weren't making them in 4x110 until enough people complained, then they finally decided to manufacture them.

It really can't be that much extra work for them. They probably just have to reprogram a CNC machine somewhere to drill the holes in different spots. The main thing is that they don't want to make a bunch of wheels that they can't sell. So we need to show them that they will sell. So start making them!

Tell your friends!

Jamie

These are very nice wheels! Kudos to Enkei for releasing them... now hopefully they'll come in 4x110 soon!

what tire size are you running?

195/50 in the front and 205/50 in the rear.

Thanks for the compliments.

I think they are very reasonable and a great option for anyone that doesn't want to look around for a set of wheels that are period correct (except for the center cap) aren't 15 years old and need to be restored .