1st Gen General Discussion The place for non-technical discussion about 1st Gen RX-7s or if there's no better place for your topic

Does your S model have a dead pedal?

Thread Tools
 
Search this Thread
 
Old Dec 23, 2007 | 12:56 AM
  #1  
Jeff20B's Avatar
Thread Starter
Lapping = Fapping
Tenured Member 15 Years
iTrader: (13)
 
Joined: Aug 2001
Posts: 15,725
Likes: 91
From: Near Seattle
Does your S model have a dead pedal?

Because mine didn't. Then I looked through my pile of 'junks' (thank wacky for that term) and found one. I must have aquired it at some point over the years.

Who here has an S model and does it have a dead pedal? Also, do all chassis have the necessary studs or threaded holes to make installation as easy as cake?

Mods, please move this to the technical section if it's too techincal for here. Thanks.
Reply
Old Dec 23, 2007 | 01:41 AM
  #2  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
my 85 S does. all chassis are able to be equipped with any option available for a 7 of the particular series. for example, the S3 S cars are prewired for any option up to a GSL-SE trim level, minus engine and ecu wiring. i added power mirrors and a hatch light to my S. the harnesses were there. i just added the hard parts.
Reply
Old Dec 23, 2007 | 01:46 AM
  #3  
j_tso's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Dec 2004
Posts: 1,972
Likes: 399
From: Austin, TX
Nope. All it had were 2 bolts where it should be.
Reply
Old Dec 23, 2007 | 02:51 AM
  #4  
FBsliderseven's Avatar
domokun!
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 1,063
Likes: 0
From: hawaii
hmm i dont remember if my old s had one.
probably didnt.
Reply
Old Dec 23, 2007 | 03:20 AM
  #5  
80DrIfTeR's Avatar
ASE ****** Mechanic
iTrader: (1)
 
Joined: Nov 2007
Posts: 204
Likes: 0
From: Hawaii
what exactlyh is a dead pedal? pictures please?
Reply
Old Dec 23, 2007 | 03:25 AM
  #6  
FBsliderseven's Avatar
domokun!
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 1,063
Likes: 0
From: hawaii
the one next to the clutch where you rest your foot.. after shifting.
Reply
Old Dec 23, 2007 | 03:39 AM
  #7  
80DrIfTeR's Avatar
ASE ****** Mechanic
iTrader: (1)
 
Joined: Nov 2007
Posts: 204
Likes: 0
From: Hawaii
i dont know... mine might have it....
Reply
Old Dec 23, 2007 | 08:13 AM
  #8  
64mgb's Avatar
Go Hawks!
iTrader: (1)
 
Joined: May 2004
Posts: 1,952
Likes: 3
From: Cedar Rapids, Iowa
My '79 SA S model does not have one. Just 2 bolts where you could bolt one on.

Rich
Reply
Old Dec 23, 2007 | 09:50 AM
  #9  
t_g_farrell's Avatar
Waffles - hmmm good
Tenured Member: 20 Years
Community Favorite
iTrader: (1)
 
Joined: Jul 2004
Posts: 9,250
Likes: 464
From: Lake Wylie, N.C.
My 80 SA GS didn't have one when I bought it used in 83. I didn't event know you could have one until I saw one on a junker. I pulled it and saw the two holes in the left kick panel and it bolted right in. One of the best upgrades I ever did.

It must have been an option when you ordered the cars. Probably dealer supplied. You know, you check the box, they charge you $200.00, and then just bolt it in when it comes off the truck. Lets the dealer make some high margin bucks I would guess.
Reply
Old Dec 23, 2007 | 10:31 AM
  #10  
Mazdax605's Avatar
79 GS,74 RE/PU
Tenured Member 15 Years
iTrader: (5)
 
Joined: Mar 2005
Posts: 1,584
Likes: 1
From: Massachusetts
Originally Posted by t_g_farrell
My 80 SA GS didn't have one when I bought it used in 83. I didn't event know you could have one until I saw one on a junker. I pulled it and saw the two holes in the left kick panel and it bolted right in. One of the best upgrades I ever did.

It must have been an option when you ordered the cars. Probably dealer supplied. You know, you check the box, they charge you $200.00, and then just bolt it in when it comes off the truck. Lets the dealer make some high margin bucks I would guess.

Your GS should have had one from the factory. My 79 GS had one right out of the box,and I believe all GS models did as well. I don't see why they would stop this in 80,as they were adding things to the car that year anyway.
Reply
Old Dec 23, 2007 | 10:44 AM
  #11  
t_g_farrell's Avatar
Waffles - hmmm good
Tenured Member: 20 Years
Community Favorite
iTrader: (1)
 
Joined: Jul 2004
Posts: 9,250
Likes: 464
From: Lake Wylie, N.C.
No clue, but it wasn't there and didn't seem to ever have been installed. No marks on the card board kick panel just the 2 holes. Maybe the first owner didn't like it or was real tall and removed it. I'm 6'1" and I still like having it there.
Reply
Old Dec 23, 2007 | 10:49 AM
  #12  
82transam's Avatar
Never Follow
Tenured Member: 20 Years
iTrader: (18)
 
Joined: Feb 2002
Posts: 8,389
Likes: 120
From: North Jersey
My 83 S didn't have one, just the two bolts like the others said, added it off my parts car years ago. Also didn't have a power hatch release, hatch light, or glove box light, added those as well.
Funny thing about the glove box light on the S models is that the switch, and bulb recepticle are there, all you need to do is add the bulb! Funny marketing decision if you ask me....
Reply
Old Dec 23, 2007 | 12:44 PM
  #13  
mikewoodkozar's Avatar
Brap, Brap, Ole!
Tenured Member 10 Years
 
Joined: Apr 2005
Posts: 1,461
Likes: 0
From: kalamazoo, mi
I would go nuts without the dead pedal
Reply
Old Dec 23, 2007 | 12:44 PM
  #14  
j_tso's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Dec 2004
Posts: 1,972
Likes: 399
From: Austin, TX
Originally Posted by 82transam
Funny thing about the glove box light on the S models is that the switch, and bulb recepticle are there, all you need to do is add the bulb! Funny marketing decision if you ask me....
This is news to me.

I ran out and checked my car, there is a spot for a bulb, but I didn't see switch. All I see is a ground wire and a black/blue stripe wire with a male connector. Is it like the door light switch/little nubbin that gets pressed?
Reply
Old Dec 23, 2007 | 01:42 PM
  #15  
mikewoodkozar's Avatar
Brap, Brap, Ole!
Tenured Member 10 Years
 
Joined: Apr 2005
Posts: 1,461
Likes: 0
From: kalamazoo, mi
lol, little nubbin
Reply
Old Dec 23, 2007 | 02:26 PM
  #16  
bad 83's Avatar
PSHH! PSHH! HEAR ME NOW?
Tenured Member 05 Years
iTrader: (3)
 
Joined: Nov 2005
Posts: 4,132
Likes: 4
From: Statesville NC
That's wierd. My 80 SA S model has one. I don't know if it came from the factory that way or not. I didn't know any came from the factory without it.
Reply
Old Dec 23, 2007 | 03:14 PM
  #17  
bugman1973's Avatar
advanced novice
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 1,073
Likes: 1
From: clarksville tn
when i got my GS the dead pedal was under this thick floor mat the two bolts where installed but the pedal wasnt when i got it i pulled up the floor mats picked it up said hey whats this. must go here installed it and went along my way. i couldnt drive with the mats in they were that really thick rubber things. oh well though right
Reply
Old Dec 23, 2007 | 04:16 PM
  #18  
Jeff20B's Avatar
Thread Starter
Lapping = Fapping
Tenured Member 15 Years
iTrader: (13)
 
Joined: Aug 2001
Posts: 15,725
Likes: 91
From: Near Seattle
Wow this turned out to be a popular topic. Now I know the dead pedal will simply bolt right in. Thanks.
Reply
Old Dec 23, 2007 | 04:27 PM
  #19  
7SpringsMisfit's Avatar
whaa
Tenured Member 05 Years
 
Joined: Oct 2006
Posts: 433
Likes: 0
From: Sewickley, PA
my 80 LS has one ha!
Reply
Old Dec 23, 2007 | 04:34 PM
  #20  
RickRx's Avatar
Full Member
Tenured Member: 15 Years
 
Joined: Nov 2006
Posts: 152
Likes: 0
From: san francisco
My 82 base model no sunroof has one..
Reply
Old Dec 23, 2007 | 07:46 PM
  #21  
pinoyremix's Avatar
Say What?
Tenured Member 10 Years
 
Joined: Jun 2007
Posts: 1,239
Likes: 0
From: Oak Harbor,WA and Santa Maria, CA
hey jeff...my 83 has one..
Reply
Old Dec 23, 2007 | 07:57 PM
  #22  
FirebirdSlayer666's Avatar
Famous Taillights
Tenured Member 10 Years
iTrader: (3)
 
Joined: Oct 2005
Posts: 3,443
Likes: 2
From: Hagerstown, MD
83 S. No pedal on mine, probably would have been nice to have on my trip from MD to ID! LOL I don't remember if mine has a glove box light but it has the hatch light
Reply
Old Dec 23, 2007 | 09:28 PM
  #23  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
Originally Posted by 80DrIfTeR
what exactlyh is a dead pedal? pictures please?
dead pedal on my 85 S:

Reply
Old Dec 23, 2007 | 10:40 PM
  #24  
1983GSP's Avatar
just another joe
Tenured Member 05 Years
 
Joined: Apr 2007
Posts: 295
Likes: 0
From: Pascagoula, MS
my 83 limited edition has one.(thumbs nose)
Reply
Old Dec 23, 2007 | 11:19 PM
  #25  
SSRx7's Avatar
Como Frejoles?
Tenured Member 10 Years
 
Joined: Jul 2004
Posts: 615
Likes: 0
From: Jacksonville, Fl
Originally Posted by mazdaverx713b
dead pedal on my 85 S:

LOL, you just cleared something up for me. Those are factory speakers in my kickpanels.

Oh, and yes, mine does have the dead pedal. But it is a GS.

Later,
Bill
Reply



All times are GMT -5. The time now is 01:33 PM.