Colour on widebody fb
#1
Full Member
Thread Starter
Join Date: May 2007
Location: norway
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Colour on widebody fb
I have bought the Mariah mode one widebody,
and I need a full respray after the bodywork are done.
Do I stick with the orginale colour combo silver dark gray or do I go plane silver with more metallic
and I need a full respray after the bodywork are done.
Do I stick with the orginale colour combo silver dark gray or do I go plane silver with more metallic
#7
Full Member
Thread Starter
Join Date: May 2007
Location: norway
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
good with the orginal silver paint.And it is way to mutch work spripping
the whole thing down.I might go another shade silver with alot more metallic.
I also might keep the dark stripe.
If I am going to do anything with the wheels it has to be
sending the to 7X17"in front back to England and get them widened to 10x17"
Then I will use the ones I have back 9X17" in front
They have already sat me back 4800 usd included rubber.
If anyone have pics of two tone widebodys do put them up
Trending Topics
#8
Good idea on the wheels. I'm going with 8.5 or 9 inches in the front and 9.5 or 10 inches in the back. Here are the wheels I'm gonna get.
Keizer Wheels makes them, they are called Kosmo wheels. The quote I got from them was $350 a piece with the specs I wanted. They will look so good once I get the money to buy them.
Keizer Wheels makes them, they are called Kosmo wheels. The quote I got from them was $350 a piece with the specs I wanted. They will look so good once I get the money to buy them.
Last edited by food7373; 01-24-10 at 01:51 PM.
#9
The specs for the Mariah Mode 1 body kit has saying that maximum wheel width in the front should be 8.5 and 9.5 for the back. Here's the website, http://www.mariahmotorsports.com/ go to products, exterior, 1979-1985, and then Mariah Mode One. They give specs for the wheels you should get. I have the Mode One body kit too.
#10
Full Member
Thread Starter
Join Date: May 2007
Location: norway
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
The specs for the Mariah Mode 1 body kit has saying that maximum wheel width in the front should be 8.5 and 9.5 for the back. Here's the website, http://www.mariahmotorsports.com/ go to products, exterior, 1979-1985, and then Mariah Mode One. They give specs for the wheels you should get. I have the Mode One body kit too.
I bought my kit from them.
But they dont say anything about the offset.
Btw cool wheels I can't wait to see them on your car
#11
Thanks. You could ask Dansyoung about the offset on his widebody. I'm probably going to go somewhere around 4" to 4.5" backspacing. Here's a chart for backspacing to offset.
Here is some more info on wheel fitment and backspacing. https://www.rsracing.com/tech-wheel.html
Here is some more info on wheel fitment and backspacing. https://www.rsracing.com/tech-wheel.html
Thread
Thread Starter
Forum
Replies
Last Post
rx7jocke
Suspension/Wheels/Tires/Brakes
72
06-17-16 03:48 AM