Sunday morning drags
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Sunday morning drags
Very early for an old man! I need to launch at higher rpm but my tralior was on loan and i didnt want to break something!
http://www.youtube.com/watch?v=omr1HxIeSRQ
What do you think?
http://www.youtube.com/watch?v=omr1HxIeSRQ
What do you think?
fyi, charlies car runs on straight 93 octane, no meth injection....... with full interior, air conditioning and power steering
Last edited by Viking War Hammer; Oct 13, 2008 at 04:23 PM.
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Thanks, the 60ft was 1.60 its done better but i pussed out. The speed was129.46 mph.
I checked the boost on the way home and it looked like 18/19psi but i dont know for sure. I do know the sheriff that was following me when i did the third gear pull got a shock. It was a dark divided highway at 4:30 am i left him like he shut the motor off and then droped back to 60 mph on cruise control he pulled up next to me and just gave me the thumbs up i about **** my pants!
Ive only been out of the hospital 2 1/2 weeks after having another stint put in and the sheriff about put me back in!
I checked the boost on the way home and it looked like 18/19psi but i dont know for sure. I do know the sheriff that was following me when i did the third gear pull got a shock. It was a dark divided highway at 4:30 am i left him like he shut the motor off and then droped back to 60 mph on cruise control he pulled up next to me and just gave me the thumbs up i about **** my pants!
Ive only been out of the hospital 2 1/2 weeks after having another stint put in and the sheriff about put me back in!
Trending Topics
Wow, didn't know you got sick again. You doing better now? You're gonna have to hire a driver Charlie ! You're gonna give yourself a heart attack. Time to trade the RX7 for a BUICK!
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Ive never had a problem raceing its the bullshit work stuff!
And im starting to get this driving stuff down i just need more power.
I went with the 4.30 gears and they were right the 60ft suffers but the trap is up.
I bet with a little practice i can get it in the 1.40's 60 ft and that will help in my quest to run 10.50's with pump gas.
Thanks for the concern but the hearts ok its the plumbing that sucks!
And im starting to get this driving stuff down i just need more power.
I went with the 4.30 gears and they were right the 60ft suffers but the trap is up.
I bet with a little practice i can get it in the 1.40's 60 ft and that will help in my quest to run 10.50's with pump gas.
Thanks for the concern but the hearts ok its the plumbing that sucks!
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Ive never had a problem raceing its the bullshit work stuff!
And im starting to get this driving stuff down i just need more power.
I went with the 4.30 gears and they were right the 60ft suffers but the trap is up.
I bet with a little practice i can get it in the 1.40's 60 ft and that will help in my quest to run 10.50's with pump gas.
Thanks for the concern but the hearts ok its the plumbing that sucks!
And im starting to get this driving stuff down i just need more power.
I went with the 4.30 gears and they were right the 60ft suffers but the trap is up.
I bet with a little practice i can get it in the 1.40's 60 ft and that will help in my quest to run 10.50's with pump gas.
Thanks for the concern but the hearts ok its the plumbing that sucks!

Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Its a big secret its worn out stock mazda shocks and springs with toe links and traling arms. But everything from the motor to the diff is solid mounted.
I would like to take credit but i just drive it the way it tells me to. Oh still on the stock axles.
Thanks guys!
I would like to take credit but i just drive it the way it tells me to. Oh still on the stock axles.
Thanks guys!
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
Sep 16, 2015 09:07 PM
rx8volks
Canadian Forum
0
Sep 1, 2015 10:46 PM



How do you get that thing to hook so well?
