New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

1st gen wont start need help asap

Thread Tools
 
Search this Thread
 
Old 08-11-13, 01:30 AM
  #1  
Junior Member
Thread Starter
 
Mazdakid28's Avatar
 
Join Date: Aug 2013
Location: NH
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
NH 1st gen wont start need help asap

Ok i got a 83 rx that been fixing up. it was runing good till cluch went, so i changed cluch and put new bearings in the tranny cuz was in there. finished it and tryed to start justclicked and didnt turn over thought battery but tested and was good, so got new starter for it after bench tested and didnt spin.

put new one in and just clicked like dead battery agien, than cables started smoking and sparked. checked all conections and everything tight and looked ok . than rewired with like 4 gauge from positive and neg to the batery still clicls and wires still hot. what could be the problem? never had this happen b4.

got to crank over once after trying for 6 hours to figure it out than wouldnt do anything agien just the clicking agien

things tryed
jumped the clutch switch
put on biger wires
tryed jumping just the starter and just clicked still
used diferent battery know was fully charged
and wraped on starter as jumping selinod

thanks for the help in advance iv looked allover for a quick anwser to fix but see ppl have the same problem but no resolve for fixing it.
Old 08-11-13, 04:42 AM
  #2  
Junior Member
Thread Starter
 
Mazdakid28's Avatar
 
Join Date: Aug 2013
Location: NH
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
lol got alot of you stumped huh see 15 ppl looked at it
Old 08-11-13, 08:56 AM
  #3  
brappppp brappppp
iTrader: (4)
 
snivley whiplash's Avatar
 
Join Date: Oct 2009
Location: everwet washington
Posts: 347
Likes: 0
Received 0 Likes on 0 Posts
take a look at all your ground wires, one is off or loose
Old 08-11-13, 12:49 PM
  #4  
Junior Member
Thread Starter
 
Mazdakid28's Avatar
 
Join Date: Aug 2013
Location: NH
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
ardy have did when changed the wires its justone ground on fire wall
Old 08-11-13, 03:25 PM
  #5  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,814
Received 306 Likes on 267 Posts
Originally Posted by Mazdakid28
... its justone ground on fire wall
the negative cable should be in contact with the body as well as the engine/transmission. when you rewired your cables, you should have kept it that way.
Old 08-11-13, 03:29 PM
  #6  
Junior Member
Thread Starter
 
Mazdakid28's Avatar
 
Join Date: Aug 2013
Location: NH
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
ya that grounds there on the strut tower. have you ever had this problem? was working fine till put in new clutch than wouldny start
Old 08-11-13, 03:47 PM
  #7  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,814
Received 306 Likes on 267 Posts
... and you're sure the connection at the starter bolt is clean and secure?
Old 08-11-13, 03:49 PM
  #8  
Junior Member
 
rx7abuser's Avatar
 
Join Date: Aug 2013
Location: central wa
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Start from scratch and check all connections on the the heavy leads coming from the battery
Old 08-11-13, 03:50 PM
  #9  
Junior Member
Thread Starter
 
Mazdakid28's Avatar
 
Join Date: Aug 2013
Location: NH
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
i rewired already
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
10-13-15 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
09-07-15 11:50 AM
craaaazzy
Comments and Suggestions Archive
3
08-21-15 02:00 PM
Marty RE
New Member RX-7 Technical
0
08-13-15 11:19 AM



Quick Reply: 1st gen wont start need help asap



All times are GMT -5. The time now is 12:36 AM.