13b-re cosmo Oil dipsticks interchange????
04-05-15, 08:44 PM
#1
Full Member
Thread Starter
Join Date: Nov 2014
Location: florida
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
13b-re cosmo Oil dipsticks interchange????
Ok soo I need some help from u gurus in here! my dilema is this I have a 87 turboII but with a cosmo 13b-re in it with the turboII oil pan but I lost my dipstick.... (I moved to a different house during my build) and I don't know if I accidently lost my dipstick or what but it gone and now I don't know what dipstick to get that will accurately read my oil level.... Ugh smh someone wit some insight on this plz help
04-07-15, 12:16 AM
#6
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
look up the parts Numbers in the Parts manuals on here:Foxed.ca and compare them.
also,you can now post in the Specific Sections as your post count is now adequate.
also,you can now post in the Specific Sections as your post count is now adequate.
Last edited by misterstyx69; 04-07-15 at 12:18 AM.
Trending Topics
04-07-15, 06:31 AM
#8
FC dipstick is not the same. It is not mostly an FC engine, just the front cover. The castings are all FD.
Length is 13.25" from the base of the seal that sits outside the tube to the tip. It is the same as the FD, which I use on both my 13B-RE and 20B, just has a much shorter handle portion. I just think it looks better.
S4 N/A dipstick is 14", meaning that the full mark would actually be running a quart low.
20B is the one with the long handle
Length is 13.25" from the base of the seal that sits outside the tube to the tip. It is the same as the FD, which I use on both my 13B-RE and 20B, just has a much shorter handle portion. I just think it looks better.
S4 N/A dipstick is 14", meaning that the full mark would actually be running a quart low.
20B is the one with the long handle
04-07-15, 07:57 AM
#10
Full Member
Thread Starter
Join Date: Nov 2014
Location: florida
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
look up the parts Numbers in the Parts manuals on here:Foxed.ca and compare them. also,you can now post in the Specific Sections as your post count is now adequate.
Thread
Thread Starter
Forum
Replies
Last Post
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM