Wolf 3D Discuss the Wolf 3D Engine Management System

Wolf 3D Wolf3d ems v500

Thread Tools
 
Search this Thread
 
Old 06-17-08, 03:45 PM
  #1  
Junior Member
Thread Starter
 
displacement is for losers's Avatar
 
Join Date: Jun 2008
Location: Richmond
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Wolf3d ems v500

Hey, I own a s4 tII and I am trying to get this ems up and running so I can start having fun. Can anyone help me out with some base maps for this? Or can anyone tell me where I can find some or find all the information I would need to create a decent platform to start from?
Old 06-25-08, 03:36 AM
  #2  
Junior Member
Thread Starter
 
displacement is for losers's Avatar
 
Join Date: Jun 2008
Location: Richmond
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
I may have some base maps ready sometime soon I'll post them up here in case anyone is interested.
Old 06-25-08, 05:13 AM
  #3  
Learned alot | Alot to go

iTrader: (2)
 
CrackHeadMel's Avatar
 
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes on 0 Posts
Whats the setup? Just an idea of porting and injector size and we can estimate some figures to get it running
Old 06-25-08, 05:25 AM
  #4  
Junior Member
Thread Starter
 
displacement is for losers's Avatar
 
Join Date: Jun 2008
Location: Richmond
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
no porting (yet) stock primaries, 720 secondaries, 10 psi
Old 07-08-08, 08:14 PM
  #5  
Learned alot | Alot to go

iTrader: (2)
 
CrackHeadMel's Avatar
 
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes on 0 Posts
if you search for base maps and i think filter with nyt as the member name that he posted some long long ago

they were for the vs400 however i think you can open them, if not just download teh v4 software and copy over the fuel and ignition maps

i would only use these to get you started though
Old 07-17-08, 07:42 AM
  #6  
Banned. I got OWNED!!!
 
megadream20's Avatar
 
Join Date: Jul 2008
Location: 1
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Re4

Lynda is a nice looking milf with huge hooters that strain her clothes. In this gallery she gets frisky with a young stud she just meets for some hot sex. She strips down to her blue lingerie, teasing him as he gets a hard on. Blond Kayla is a bruthas who luv ****** that likes to have kinky sex at home, besides doing her art students at school. Here she is getting her hubby turned on, I am Eighteen wearing a little red bra and thong. She pops her perky **** over the top of her bra, letting him have a nice lick of them. Then she goes down on his dick, sucking it good and deep till it’s rock hard.hot chicks perfect **** has him come over to her and grabs his throbbing dick, sucking on it like a real pro. Slipping off her lingerie she pops out her huge knockers and gives him a good tit ****. Then she sits on the edge of a table and lets him slide it in her wet *****, slamming away like crazy as she gets the poor boy all worked up. This pregnant teen is one hot mom, and at Brazzers you get to see lots of them in hot hard core action!. She bends over and points her firm round *** in the air as he takes her from behind, bouncing hard off her sweet ***. Wanting a little extra she straddles him and sinks down on his shaft up her ***** stretching it to the limit and rocking like crazy. Finally he pulls out and creams her face with his man juice. See all the hot action at big **** like big dicks.
Old 07-18-08, 06:12 PM
  #7  
watashi no shichi

iTrader: (4)
 
hwnd's Avatar
 
Join Date: May 2005
Location: San Francisco
Posts: 1,770
Received 6 Likes on 4 Posts
would be nice to remove their awesome MILF posts when banning them;
Old 07-18-08, 07:59 PM
  #8  
Junior Member
Thread Starter
 
displacement is for losers's Avatar
 
Join Date: Jun 2008
Location: Richmond
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Derrick Ambrose from Corksport was nice enough to hook me up with some start-up maps, I installed the ECU today but haven't had a chance to start it up and check out how well they work. I'll keep you all posted and if anyone knows of a file hosting server thats free I'll post the map online and link it to this thread.

As a side note I have a M&W ignition for use with the ecu. However I can't figure out how to wire it up. Could any of you assist me with some instructions on how to do so?

http://www.mwignitions.com/pdf/Module.pdf

Those are the directions given to me, So, I'd assume coil negative 1 goes to leading and 2 and 3 to the trailing coil negatives. It's the triggers that confuse me... Does anyone know how to hook this thing up?

Thanks
Old 07-18-08, 08:46 PM
  #9  
Learned alot | Alot to go

iTrader: (2)
 
CrackHeadMel's Avatar
 
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes on 0 Posts
I belive the 'triggers' are the wolf's ignition outputs. What im wondering is what do you connect to the coil positives? just switched 12v? whats the benifit of this unit?
Old 07-18-08, 09:03 PM
  #10  
Junior Member
Thread Starter
 
displacement is for losers's Avatar
 
Join Date: Jun 2008
Location: Richmond
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Yea thats what I was assuming but that also begs the question which ignition outputs, lol. Well If I figure it out I'll let you all know, or if you beat me too it I would appreciate it if you let me know lol.

Thanks again
Old 07-27-08, 07:44 PM
  #11  
Junior Member
Thread Starter
 
displacement is for losers's Avatar
 
Join Date: Jun 2008
Location: Richmond
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/trailing-coil-ignitor-774442/

I got off my lazy *** and figured it out.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
frijol
Microtech
7
09-23-15 12:51 PM



Quick Reply: Wolf 3D Wolf3d ems v500



All times are GMT -5. The time now is 02:07 AM.