Does anyone know what a good price would be to pay for the version 3? I just got one and I was wondering if i got a good deal or not. Also looking for someone close to install/tune. Also was wondering if i would have to run premix. Thanks

 

if youre using an electronic OMP (s5/s6) then you will need to run premix as the wolf v3 will not power it.

I could have used an s4 cover/omp on my engine, but i chose premix anyway as it makes a nice difference.

 

I have a series 5 but I also have the s4 omp and front cover too. what advantages if any are there in running premix. Seems like it would cost out the *** in the long run.

 

you'll need to ask Michael if you can borrow his flame suite

if i recall correctly - premixing the fuel was the perfect-storm, as you'd be able to run synthetic oil in the engine; please dont take my word for it, search the forums as this topic has been covered time and time again;

 

if you tear apart an engine using the OMP, you'll see the spots that are well lubricated, and the spots that rent.

using premix lets it cover the area a lot better, and you can control the ratio you want to use.

I run around 125-150:1. and run mobil1 synthetic 10w30 in my engine.

 

So it will be safer for my engine to run premix. I will have to do some research. Thanks for the input guys.

 

Was thumbing through the manual and ran into the part about the security pin. the guy i bought from bought it from someone else...so if there was ever a security pin im pretty screwed huh? if i send it back to the factory they can reset it and check everything for me? any idea on costs anyone?

 

I've seen complete V3.1s fetch for around $400.
This is including the pre-wired loomed harness , hand controller , and even
the modified CAS. If your is coded, you might be able to send it back to Wolf Aus.

You just pay for shipping to and from, I doubt they would charge you for the service.

Talk to Natalie, She should be able to help you out.

enquiries@wolfems.com.au

 

I guess i got screwed. i paid 500 for the 3.0