Wolf 3d
 

Does anyone know what a good price would be to pay for the version 3? I just got one and I was wondering if i got a good deal or not. Also looking for someone close to install/tune. Also was wondering if i would have to run premix. Thanks

if youre using an electronic OMP (s5/s6) then you will need to run premix as the wolf v3 will not power it.

I could have used an s4 cover/omp on my engine, but i chose premix anyway as it makes a nice difference.

I have a series 5 but I also have the s4 omp and front cover too. what advantages if any are there in running premix. Seems like it would cost out the ass in the long run.

you'll need to ask Michael if you can borrow his flame suite :rlaugh:

if i recall correctly - premixing the fuel was the perfect-storm, as you'd be able to run synthetic oil in the engine; please dont take my word for it, search the forums as this topic has been covered time and time again;

if you tear apart an engine using the OMP, you'll see the spots that are well lubricated, and the spots that rent.

using premix lets it cover the area a lot better, and you can control the ratio you want to use.

I run around 125-150:1. and run mobil1 synthetic 10w30 in my engine.

So it will be safer for my engine to run premix. I will have to do some research. Thanks for the input guys.

Was thumbing through the manual and ran into the part about the security pin. the guy i bought from bought it from someone else...so if there was ever a security pin im pretty screwed huh? if i send it back to the factory they can reset it and check everything for me? any idea on costs anyone?

I've seen complete V3.1s fetch for around $400.
This is including the pre-wired loomed harness , hand controller , and even
the modified CAS. If your is coded, you might be able to send it back to Wolf Aus.

You just pay for shipping to and from, I doubt they would charge you for the service.

Talk to Natalie, She should be able to help you out.

enquiries@wolfems.com.au

I guess i got screwed. i paid 500 for the 3.0