Wolf 3D Map with temp correction for bosch M12 sensor (included with wolf)
Thread Starter
Joined: Feb 2001
Posts: 1,259
Likes: 4
From: long island
Map with temp correction for bosch M12 sensor (included with wolf)
Since the temp table that came with the wolf is way off, I just picked up a new multi meter with a temp probe.
This table should be accurate from 60c-105c where I used actual readings from my temperature probe.
Anything past that is interpolated.
when it gets cold, I'll post another one with the lower areas corrected.
This is a good start for now with the IMPORTANT areas being accurate.
all temps should be within .3c of the readings I took.
http://countercultured.net/maps/r07-17-07-01.wmf
This table should be accurate from 60c-105c where I used actual readings from my temperature probe.
Anything past that is interpolated.
when it gets cold, I'll post another one with the lower areas corrected.
This is a good start for now with the IMPORTANT areas being accurate.
all temps should be within .3c of the readings I took.
http://countercultured.net/maps/r07-17-07-01.wmf
Thread Starter
Joined: Feb 2001
Posts: 1,259
Likes: 4
From: long island
update, http://countercultured.net/maps/latest.wmf (07/30/07). temp map hasn't changed, just link has.
Thread Starter
Joined: Feb 2001
Posts: 1,259
Likes: 4
From: long island
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM
befarrer
Microtech
3
Aug 22, 2015 05:52 PM
