Wolf 3D Cannot use 4,72 software!
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Location: ITALY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Cannot use 4,72 software!
Hi all,
i came here because i'm having a big problem.
We bought the Wolf3d V400 + V400 Dash, included software.
Since we installed the ECU, car started the first try adn stays very well and respondes well to throttle.
The problem is that when i connect PC to ECU and launch the Wolf program, as it opens, an error dialog box appears saying:
A version 4 ECU was expected but version 4,72 was found. Application terminates.
The software is the latest 4,72 Rev. 1.66 then why it expected a version 4 ECU?
Anyone had similar problem or could guess the reason?
Please, we have a competition upcoming...
i came here because i'm having a big problem.
We bought the Wolf3d V400 + V400 Dash, included software.
Since we installed the ECU, car started the first try adn stays very well and respondes well to throttle.
The problem is that when i connect PC to ECU and launch the Wolf program, as it opens, an error dialog box appears saying:
A version 4 ECU was expected but version 4,72 was found. Application terminates.
The software is the latest 4,72 Rev. 1.66 then why it expected a version 4 ECU?
Anyone had similar problem or could guess the reason?
Please, we have a competition upcoming...
#2
Rotary Enthusiast
iTrader: (1)
I would suggest emailing or calling wolf. their info is on http://wolfems.com.au
Originally Posted by driftclub.it
Hi all,
i came here because i'm having a big problem.
We bought the Wolf3d V400 + V400 Dash, included software.
Since we installed the ECU, car started the first try adn stays very well and respondes well to throttle.
The problem is that when i connect PC to ECU and launch the Wolf program, as it opens, an error dialog box appears saying:
A version 4 ECU was expected but version 4,72 was found. Application terminates.
The software is the latest 4,72 Rev. 1.66 then why it expected a version 4 ECU?
Anyone had similar problem or could guess the reason?
Please, we have a competition upcoming...
i came here because i'm having a big problem.
We bought the Wolf3d V400 + V400 Dash, included software.
Since we installed the ECU, car started the first try adn stays very well and respondes well to throttle.
The problem is that when i connect PC to ECU and launch the Wolf program, as it opens, an error dialog box appears saying:
A version 4 ECU was expected but version 4,72 was found. Application terminates.
The software is the latest 4,72 Rev. 1.66 then why it expected a version 4 ECU?
Anyone had similar problem or could guess the reason?
Please, we have a competition upcoming...
#3
Junior Member
Thread Starter
Join Date: Aug 2006
Location: ITALY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
i did it all...
with the ECU i received on a CD version 4,72 Rev. 1.62
i told them the problem i had and they sent me the Rev. 1.66 but got the same problem.
I told them this too and they said they will be thinking about the possible reason and in the meanwhile sent me the older version (without 3D maps)
i wanted to know if anyone of you had this kind of connection problem
with the ECU i received on a CD version 4,72 Rev. 1.62
i told them the problem i had and they sent me the Rev. 1.66 but got the same problem.
I told them this too and they said they will be thinking about the possible reason and in the meanwhile sent me the older version (without 3D maps)
i wanted to know if anyone of you had this kind of connection problem
#4
Rotary Enthusiast
Join Date: Feb 2004
Location: North Queensland Australia
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Did you install it over the old software? If so uninstall it all and then reboot. reboot again and then install the latest software.
Cheers
Michael Smith
Cheers
Michael Smith
#5
Junior Member
Thread Starter
Join Date: Aug 2006
Location: ITALY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
no there was no previous old software because we just purchased the V400 and the coming software was already 4,72 version, and we had never used Wolf before.
But the strange is that software says it detects ECU version 4,72 but expected version 4.
But the strange is that software says it detects ECU version 4,72 but expected version 4.
#7
Junior Member
Thread Starter
Join Date: Aug 2006
Location: ITALY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
thanks Pilot, we did trhis too.
Now my last doubt is that uninstall of 1.62 left some registry files and we'll try to install 1.66 directly on another Laptop where nothing was previously installed.
Now my last doubt is that uninstall of 1.62 left some registry files and we'll try to install 1.66 directly on another Laptop where nothing was previously installed.
Trending Topics
#10
I'm with stupid -----^
Join Date: Mar 2001
Location: Calgary, AB, Canada
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
download and install :
http://www.microsoft.com/downloads/d...displaylang=en
You must use this version of .NET .. there is a newer versino out there, version 2.0, unfortunately that will not work..
http://www.microsoft.com/downloads/d...displaylang=en
You must use this version of .NET .. there is a newer versino out there, version 2.0, unfortunately that will not work..
#11
I have exactly the same problem and tried everything mentioned in this thread, nothing worked. Also Wolf doesn't seem to have a solution, I informed them 3 weeks ago and I'm still waiting for a solution.
#12
Junior Member
Thread Starter
Join Date: Aug 2006
Location: ITALY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
thanks, but we installed donetfx already, otherwise software would not even install.
The problem is this strange compatibility issue, but it is strange that a 4,72 version software says that it expected a Version 4 ECU but version 4,72 was found. It should be happy to have found a version 4,72!
And the found ECU is not a version 4!
The problem is this strange compatibility issue, but it is strange that a 4,72 version software says that it expected a Version 4 ECU but version 4,72 was found. It should be happy to have found a version 4,72!
And the found ECU is not a version 4!
#13
I found the problem. I had to change my language/country-settings in Windows from German to English/Australia. I think it is because the "," and "." decimal separator. I hope this will help some people.
#14
Junior Member
Thread Starter
Join Date: Aug 2006
Location: ITALY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Danke Legendenkiller,
in fact we also had problems in operating due to keys...
we'll try this and let You know if it also solves the program startup problems...
in fact we also had problems in operating due to keys...
we'll try this and let You know if it also solves the program startup problems...
Originally Posted by Legendenkiller
I found the problem. I had to change my language/country-settings in Windows from German to English/Australia. I think it is because the "," and "." decimal separator. I hope this will help some people.
Thread
Thread Starter
Forum
Replies
Last Post