West RX-7 Forum Serving California, Nevada, Arizona, Hawaii

Urgent: Need rotary shops

Thread Tools
 
Search this Thread
 
Old Jun 15, 2006 | 04:16 PM
  #1  
Bunchies's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2006
Posts: 660
Likes: 0
From: CA
Urgent: Need rotary shops

So I was just cruising along the freeway today at about 70mph when all of the sudden, a very loud buzzer goes off in my car. I look at the warning lights and nothing is on. I look at my oil pressure and temperature gauges, they seem normal. The pressure was between 30 and 60 and the temperature was right at the midway point. So I pulled off, cut the ignition and got out. Immediately I saw smoke rising from the entire car. The wheel wells, the hood, etc. I looked underneath the car and found a huge spill of oil. The smoke was probably due to the oil getting EVERYWHERE on the car.

My question is: Do you guys know what happened to the car? It is a 1989 Turbo II with 123k on the stock motor. Thanks a bunch.

Also, if anyone is in the bay area, do you know of any shops that I should take the car to? Rotary extreme is not taking anymore cars, AND they want 6000 dollars for an engine rebuild. I called Mr. Mazda and they can't take the car until wednesday. If anyone could help me out, that'd be great.
Reply
Old Jun 15, 2006 | 05:40 PM
  #2  
LiquidR1's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Oct 2004
Posts: 49
Likes: 0
From: Bay Area
Try Rick's Rotary performance in pleasanton.
925-484-2324
Good luck.
Reply
Old Jun 16, 2006 | 01:44 AM
  #3  
Bunchies's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2006
Posts: 660
Likes: 0
From: CA
Ahh, thanks a lot. I actually had it taken to rotorsport, but thanks a lot anyway. I appreciate the help.
Reply
Old Jun 16, 2006 | 02:58 PM
  #4  
LiquidR1's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Oct 2004
Posts: 49
Likes: 0
From: Bay Area
Cool, hope you get it back on the road soon.
Reply
Old Jun 16, 2006 | 03:15 PM
  #5  
AcidAngel7477's Avatar
We're All Fkd..
Tenured Member: 15 Years
Liked
iTrader: (16)
 
Joined: Nov 2005
Posts: 8,727
Likes: 3
From: Whittier,CA
oooo...man uncool...hopefully the oil line to the turbo dident bust...that or a oil cooler line..good luck just the same...

:AA:
Reply
Old Jun 16, 2006 | 03:23 PM
  #6  
Bunchies's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2006
Posts: 660
Likes: 0
From: CA
Originally Posted by AcidAngel7477
oooo...man uncool...hopefully the oil line to the turbo dident bust...that or a oil cooler line..good luck just the same...

:AA:
Rotorsport just called. They said that they fixed it and that it was running fine. However, I do need a few things befitting a car of its age/mileage.

Drive belts will need to be replaced soon, brake fluid has a minor leak, shocks need to be done soon, exhaust has a leak as well. Time to spend more money!
Reply
Old Jun 17, 2006 | 12:32 AM
  #7  
AcidAngel7477's Avatar
We're All Fkd..
Tenured Member: 15 Years
Liked
iTrader: (16)
 
Joined: Nov 2005
Posts: 8,727
Likes: 3
From: Whittier,CA
or you can do it yourself and save a **** load..haha thats what i do..wayy better..

:AA:
Reply
Old Jun 17, 2006 | 01:08 AM
  #8  
jhammons01's Avatar
Carter 2.0
Tenured Member 10 Years
 
Joined: Jun 2004
Posts: 6,262
Likes: 7
From: Irvine Ca.
Originally Posted by Bunchies
Drive belts will need to be replaced soon, brake fluid has a minor leak, shocks need to be done soon, exhaust has a leak as well. Time to spend more money!
That is a typical "would you like to supersize those fries, Sir?" All they are doing is upselling you for more work. If your Bakes are leaking...have you ever had to top off the res? Shocks?? Whose car does not need NEW shocks? Exhaust leak? A real Muffler shop will weld it closed or rplace a gasket in about 10 mintues and charge you a $20....but it has to be a real Muffler shop not a Midas. A good muffler man is hard to find.
Reply
Old Jun 17, 2006 | 02:01 PM
  #9  
Bunchies's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2006
Posts: 660
Likes: 0
From: CA
Originally Posted by jhammons01
That is a typical "would you like to supersize those fries, Sir?" All they are doing is upselling you for more work. If your Bakes are leaking...have you ever had to top off the res? Shocks?? Whose car does not need NEW shocks? Exhaust leak? A real Muffler shop will weld it closed or rplace a gasket in about 10 mintues and charge you a $20....but it has to be a real Muffler shop not a Midas. A good muffler man is hard to find.
haha don't worry, I don't intend on going back to the shop anyway. A huge part of my reasoning for getting this fc was to do all of the work myself. Unfortunately, due to the somewhat emergency oriented nature of this problem, I needed it fixed as soon as possible. I'm had this car for three weeks, I've driven it 600 miles, cut me a bit of slack. :p

He can try to upsell all he wants, but that doesn't change the fact that I'm going to be doing most, if not all of the work myself.
Reply
Old Jun 18, 2006 | 01:54 PM
  #10  
WWWoRX7oCOM's Avatar
Newbie
 
Joined: May 2006
Posts: 1
Likes: 0
From: Nor Cal
anyone recommend or know any rotory tune up shops in or around SF?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wickedrx2
The Bad & Fugly Members
10
Jun 10, 2021 06:28 PM
AXA
Single Turbo RX-7's
8
Sep 5, 2015 10:06 AM
kkev.7788
West RX-7 Forum
0
Sep 2, 2015 02:13 AM




All times are GMT -5. The time now is 09:04 PM.