Steve Kan Tuning Session in April: Who's Coming With Me??
#51
Carter 2.0
$400 bucks?? For a tune up?
Where does this Steve Kan have a shop?? And how much does this shop normally charge for a tune?
I Still didn't get my original question answered but nevermind, I need more info before I drop anywhere near $400 bux
Where does this Steve Kan have a shop?? And how much does this shop normally charge for a tune?
I Still didn't get my original question answered but nevermind, I need more info before I drop anywhere near $400 bux
#52
Junior Member
Thread Starter
Join Date: Jul 2005
Location: California
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Guys. Im still waiting to hear back from the guys at RotaryX/Gotham for a confirmation of the dates. Im drooling over here waiting and I know you guys are too. Ill post the info when I hear back from them. Sorry for the suspense but Im in the same boat as you guys.
#53
Rotary Freak
Join Date: Feb 2001
Location: fort worth, tx, usa
Posts: 1,926
Likes: 0
Received 0 Likes
on
0 Posts
The earliest I can do this will be April 28-29 weekend. I think I already reply some emails recently but I wasn't sure if you guys already decided a date and/or you wanted me to set a date for you guys.
Steve
Steve
#55
Rotary Freak
Join Date: Feb 2001
Location: fort worth, tx, usa
Posts: 1,926
Likes: 0
Received 0 Likes
on
0 Posts
I was just in San francisco back in Dec. I don't think there were any plans to go there at this time. If you guys can gather enough for Nor Cal, I'm sure I can setup an schedule for you guys. Other than the April 28-29. My next available time slot will be in July.
Steve
Steve
Originally Posted by fd3s_rx7
will there be one in Nor Cal sometime soon...??
or anybody planning on organizing one soon??
or anybody planning on organizing one soon??
#57
Junior Member
Thread Starter
Join Date: Jul 2005
Location: California
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
April 28-29th works perfect for me. Ill PM you to get rest of the details. Everyone sound off get a list of confirmations.
1. Slopoke03 (organizer)
2.
3.
4.
5.
6.
7.
8.
9.
10.
1. Slopoke03 (organizer)
2.
3.
4.
5.
6.
7.
8.
9.
10.
#58
Don't worry be happy...
iTrader: (1)
April 28-29th works perfect for me. Ill PM you to get rest of the details. Everyone sound off get a list of confirmations.
1. Slopoke03 (organizer)
2. Montego
3.
4.
5.
6.
7.
8.
9.
10.
Edit- Just say the word and you will have a deposit from me.
1. Slopoke03 (organizer)
2. Montego
3.
4.
5.
6.
7.
8.
9.
10.
Edit- Just say the word and you will have a deposit from me.
Last edited by Montego; 03-06-06 at 07:10 PM.
#59
Speed Mach Go Go Go
iTrader: (2)
Join Date: Oct 2001
Location: My 350Z Roadster kicks my RX7's butt
Posts: 4,772
Likes: 0
Received 2 Likes
on
2 Posts
I don't think I will make Arizona this month. I'll be lucky if I make this one but put me down. I will PM Atilla, he should be ready to.
Dynamic Autosports
20521 Teresita Way.
Lake Forest, CA., 92630
949-457-1234 Danny Pham (I would recomend speaking with Mgr for this instead)
Dynamic Autosports
20521 Teresita Way.
Lake Forest, CA., 92630
949-457-1234 Danny Pham (I would recomend speaking with Mgr for this instead)
#61
R.I.P. DAVE
Join Date: Aug 2004
Location: Newport Beach, California
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
i'm most definately in if i can get the funds, work just cut my hours and i need to get my ignition deficiency sorted out. I hope i have 450 bucks by april as this is a pretty big deal for me.
XS engineering must be laughing at me for the 300 rwhp for $700 tune they did...im pissed now. Someone please say that 300 rwhp on a t04e is sad. My car also is pretty bucky and erratic when i let off the throttle/hold rpm's, i believe that steve is pretty good about fixin that.
I'm going to have a jacob's fc1000 by april...
What else do you recogmend Steve in the field of ignition mods; everything is stock right now...i need advice so my car is up to the task.
thanks in advance:
Brian
XS engineering must be laughing at me for the 300 rwhp for $700 tune they did...im pissed now. Someone please say that 300 rwhp on a t04e is sad. My car also is pretty bucky and erratic when i let off the throttle/hold rpm's, i believe that steve is pretty good about fixin that.
I'm going to have a jacob's fc1000 by april...
What else do you recogmend Steve in the field of ignition mods; everything is stock right now...i need advice so my car is up to the task.
thanks in advance:
Brian
#67
R.I.P. DAVE
Join Date: Aug 2004
Location: Newport Beach, California
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
talked to louie at RRR, (dont hold me to this) but he said the dyno rate if someone else is doing the tuning is $75 an hour...normally 125 if they are tuning.
i think that is going to be the best price around, but whoever is organizing this should givem a call so they can confirm price and date...or confirm on that dynamic autosports price and whatnot...
714-839-8018 for RRR
i think that is going to be the best price around, but whoever is organizing this should givem a call so they can confirm price and date...or confirm on that dynamic autosports price and whatnot...
714-839-8018 for RRR
Last edited by RX7_Fanatic; 03-07-06 at 11:55 PM.
#68
Junior Member
Thread Starter
Join Date: Jul 2005
Location: California
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Whoa, 75 and hour is a great price. Almost to the point of being unbelievable. Either way, Ill give them a call once I can get a confirmation on the dates from Steve. Thanks for looking into this.
#71
Junior Member
Thread Starter
Join Date: Jul 2005
Location: California
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
I've still yet to hear back from either Steve K. or Scott at RotaryX/Gotham on this. Once they contact me with the details, i will pass the info along to the group and we can figure out dates, locations, deposits as confirmation, etc. There's not much we can do without confirmation from Steve, so Im in the same boat as you.
#72
Nice talking to you slopoke03, here is the link to sign up for the tune.
http://www.rotaryx.com/index.php?a=1002&b=366
Here's a link to the tread to discuss this meet or ask questions.
https://www.rx7club.com/showthread.p...37#post5397837
http://www.rotaryx.com/index.php?a=1002&b=366
Here's a link to the tread to discuss this meet or ask questions.
https://www.rx7club.com/showthread.p...37#post5397837
Last edited by RotaryX; 03-10-06 at 11:02 PM.
#75
Full Member
Join Date: Aug 2004
Location: Huntington Beach
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Okay So... i'm planning on joining you guys for this but I have one quick question.... Okay my fuelpump is a walbro 255 and this is gunna be what is limiting my horsepower numbers.(800,1600injs) I do not have a fuel pressure gauge and am wondering if steve will be able to tune my car easily for almost the limit of the fuel pump without having a fuel pressure gauge to watch. i hear the limits of 255's are around 480rwhp does that sound right?