When I try to burn a cd I get this error msg from nero when it's about 80% done...

Any techs out there or any have any solutions for this?

I've used the same CD's and it's on off, some times it works sometimes not but most of the time lately it has not worked.

-Ryan

 

If you are surfing the internet while burning a cd, it could affect the outcome.

 

slow it down, wait 16x? that's slow, get a new burner

 

new burner ryan, that one is toast and will just get worse

 

Error at 16x? OMG...that's a slow burner or at that speed you shouldn't experience many issues unless your processor has a speed for 300-400mhz. Trash your PC sir.

What's the specs of your PC? OS? What brand of media are you using...cheap Fry's bran?? Great Quality??

 

new burner

 

hahahhaa ryan is getting $hit for his $5 burner!

lol

 

hahaha, well it was replaced already by Best Buy under warranty...

Anyone know any deals on DVD RW drives?

-Ryan

 

It's all about Bluray Disc burners, 50GB per disc (DL).
Only a mere $600 for a drive. (-_^)b

 

Plextor...or Liteon...do a soych on pricegrabber.com

 

First you gotta Check the Calibrations and Reset the Zero Lunar Point and CPG. Connect Control Module to Quazicortex Molecular Ion Pump. Rebuild Neural Linkage Network. Update Metamora Cortex Parameters. Restrict Feet Footwork Control. Transfer Functions to Correct Coronial Estivation. Check to see if CPG Setting Complete. Also Check if your Neural Linkage Ion Concentration is running Normal. Double check to see if your Metamora Parameters updated. Check your Nuclear Reactor and Power Flow to see if it's Normal. Make sure Main Power Online and your Output Increase is Stable. Make sure your Conduits are Online. Then Relay Power to Accumulator. Confirm your Connection watch if your Flow is Stable and Life Support Systems Normal. Make sure the CIC and Weapons Systems are Online. Then Maintain External Impact Damper at Maximum Output. Link Main Power and check if Engine is Stable. All Systems SHOULD be Online. Then your ready for take off Sir!

 

Are you trying to say that he should trouble shoot the IDE cable to the Motherboard, pin point whether the BUS to the L1 Cache is functioning properly, then if not, verify if there is an IRQ conflict? If that isn't the issue He'll need to ensure if the ATAPI interface is properly assigned to the correct module corresponding to the device driver.

 

nah I was joking. That was all bullshit that you think they should do in startreck

 

So t'was I sir...

 

Well think I got a IQ of 71 which is pretty much mentally ill. But anyway but I'm saying is there are known unknowns and there are unknown unknowns.

 

Try uninstalling nero and re-installing it, there might be a missing file or it could be corrupted by sypware. Try that before you start ripping things apart .
Peace for the Town

 

boo media or your computer is boo boo. You're going to need to upgrade either way. How are you even running Nero in Win 3.11? I would get atleast 32megs of ram and get 98, maybe even SE.

 

Throw it in the trash

 

Get a Mac

 

Thanks for all the responces.



haha, Hey do you have a running car to go cruising? Im setting one up on a Saturday. 5, 12, or 19th.


-Ryan

 

Come on man...this is ryan we talkin about here. He just bought a digital camera a couple months agao ehhehee.

 

hey !

??? ???

 

I didn't know you spoke "Nerd" !

 

He is a NERD !

 

He's ragging on you DC!