Bay Area: Steve Kan tuning , late June 2013
#56
Full Member
iTrader: (3)
Join Date: Feb 2002
Location: San Francisco
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
i have mods list in the youtube link, it's pretty lengthy so I don't know if I'd want to post it here.
Turbos - Stock Twins
Engine - Stock rebuild
When I get around to doing a rebuild, I would do a street port and probably upgrade to BNR's or Efini twins. I'd like to keep it twin. I may do 1300cc secondaries. Then I'd be shooting for 350rwhp or so.
Turbos - Stock Twins
Engine - Stock rebuild
When I get around to doing a rebuild, I would do a street port and probably upgrade to BNR's or Efini twins. I'd like to keep it twin. I may do 1300cc secondaries. Then I'd be shooting for 350rwhp or so.
#58
Spirit-R Fanatic
iTrader: (3)
i have mods list in the youtube link, it's pretty lengthy so I don't know if I'd want to post it here.
Turbos - Stock Twins
Engine - Stock rebuild
When I get around to doing a rebuild, I would do a street port and probably upgrade to BNR's or Efini twins. I'd like to keep it twin. I may do 1300cc secondaries. Then I'd be shooting for 350rwhp or so.
Turbos - Stock Twins
Engine - Stock rebuild
When I get around to doing a rebuild, I would do a street port and probably upgrade to BNR's or Efini twins. I'd like to keep it twin. I may do 1300cc secondaries. Then I'd be shooting for 350rwhp or so.
efini twins won't get you a lot more power but just spool faster, especially on the primary turbo
#59
Full Member
iTrader: (3)
Join Date: Feb 2002
Location: San Francisco
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
car doesn't pass smog anyways. I think I only have a year or so of enjoyment left. "blank" is getting harder and harder to come by but I've been doing it for 10 years.
My car is 2 different colors now since I just sold my FEED front bumper and hood (went OEM 99 spec).
Here are 3 stages of the car:
FEED Hood/Bumper with Enkei RPF1's 17x9+45
FEED Hood/Bumper with Enkei Raijin 18x9.5+15
Car as it sits now with OEM 99 Bumper with Enkei Raijin 18x9.5+15 (+15MM Spacer in Rear, so +0 in rear)
Other car - R35
My car is 2 different colors now since I just sold my FEED front bumper and hood (went OEM 99 spec).
Here are 3 stages of the car:
FEED Hood/Bumper with Enkei RPF1's 17x9+45
FEED Hood/Bumper with Enkei Raijin 18x9.5+15
Car as it sits now with OEM 99 Bumper with Enkei Raijin 18x9.5+15 (+15MM Spacer in Rear, so +0 in rear)
Other car - R35
#62
i have mods list in the youtube link, it's pretty lengthy so I don't know if I'd want to post it here.
Turbos - Stock Twins
Engine - Stock rebuild
When I get around to doing a rebuild, I would do a street port and probably upgrade to BNR's or Efini twins. I'd like to keep it twin. I may do 1300cc secondaries. Then I'd be shooting for 350rwhp or so.
Turbos - Stock Twins
Engine - Stock rebuild
When I get around to doing a rebuild, I would do a street port and probably upgrade to BNR's or Efini twins. I'd like to keep it twin. I may do 1300cc secondaries. Then I'd be shooting for 350rwhp or so.
The car is looking good, you should get 350/hp easily with BNR's, but they will require some other supporting mods.
I also see that you get service from Paul at Rotorsport.
There is an FD that Paul built the motor for, and it made 330/hp @14.7psi on a conservative tune. This was with a set of 99 specs, so BNR's should get you there.
Nice choices in cars...love GTR's.
#63
Full Member
iTrader: (3)
Join Date: Feb 2002
Location: San Francisco
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
The car is looking good, you should get 350/hp easily with BNR's, but they will require some other supporting mods.
I also see that you get service from Paul at Rotorsport.
There is an FD that Paul built the motor for, and it made 330/hp @14.7psi on a conservative tune. This was with a set of 99 specs, so BNR's should get you there.
Nice choices in cars...love GTR's.
I also see that you get service from Paul at Rotorsport.
There is an FD that Paul built the motor for, and it made 330/hp @14.7psi on a conservative tune. This was with a set of 99 specs, so BNR's should get you there.
Nice choices in cars...love GTR's.
How good is Paul doing at rebuilding motors? I'll be looking for a street port.
#64
new rebuild with the followings:
Streetport
99 twins
supra fuel pump
PFC
1300 sec. inject
HKS twin power
HKS RS intake
Greddy M spec fmic
dp
mp
exhaust
At every boost setting, Paul's motor made 7-10hp more, and Steve said it's down to the porting.
#66
#68
rotary sensei
iTrader: (5)
Join Date: Mar 2001
Location: Virginia
Posts: 2,312
Likes: 0
Received 0 Likes
on
0 Posts
The car is looking good, you should get 350/hp easily with BNR's, but they will require some other supporting mods.
I also see that you get service from Paul at Rotorsport.
There is an FD that Paul built the motor for, and it made 330/hp @14.7psi on a conservative tune. This was with a set of 99 specs, so BNR's should get you there.
Nice choices in cars...love GTR's.
I also see that you get service from Paul at Rotorsport.
There is an FD that Paul built the motor for, and it made 330/hp @14.7psi on a conservative tune. This was with a set of 99 specs, so BNR's should get you there.
Nice choices in cars...love GTR's.
Thread
Thread Starter
Forum
Replies
Last Post
edmcguirk
NE RX-7 Forum
3
05-30-18 06:50 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM