Frank,
right now the REW is setup for nickel and blue. Soon we will have Black/Nickel, and red/Nickel too.

We still would like the dimensions on you gilmer kit so I can see what we can do for ya. But for now count on OEM. If we're able to make the gilmer stuff work I can just sell the one or two replacement parts for cheap.

For the payment stuff please refer to
https://www.rx7club.com/showpost.php...5&postcount=47

 

I completely failed at following your payment instructions. I apologize.. :/ So I sent it in a PM.. But, deposit sent. It should show from my business account of Sin City Vinyl Graffix.

 

It's about time somebody made one of these. My only concern, however, is making sure TDC is truly TDC with respect to the asymmetric bolt pattern that can float around relative to the different front hubs on the FC. Otherwise, this kit looks utterly fantastic and would be something I'd recommend to everyone with a standalone.

B

 

Brian,
Thanks! You're absolutely correct. TDC must be setup as TDC lol. We've got some good instructions developed up to ensure the average mechanic can install this with no issues.

We also have two centering rings; one with the stock asymetric bolt pattern, and another for aftermarket pullies (i.e. symmetric bolts).

 

Hi
Will this work with Mazdatrix side mount alternator bracket.
Regards Dave

 

Can you measure the spacers that are used to mount the bracket to the front cover? It actually looks like we might get lucky and be able to make something work...

 

finally. i am saving this thread.

will this item still be offered after the group buy expiration date?

 

Absolutely, just at retail.
Thanks!

 

List

1. TitaniumTT (RCC)
2. FrankV702 (RX7CLUB)
3. IAN (RCC/RX7CLUB)
4. 13Brenova (RX7CLUB)

Only need 2 more to get the price down to the next level!!

 

Im in it to win it. put my name into the group buy.

 

Awesome, just need 1 more!

1. TitaniumTT (RCC)
2. FrankV702 (RX7CLUB) deposit paid
3. IAN (RCC/RX7CLUB) deposit paid
4. 13Brenova (RX7CLUB) paid in full
5. SirCygnus (RX7CLUB)

 

For your viewing pleasure!


http://www.youtube.com/watch?v=E3jyFenRsDA

 

how much is the deposit and what is the ship date we are looking at?

 

Deposit is $50, GB ends Saturday April 16th, and the ship date is monday the 18th.

The post with all of the information is..
https://www.rx7club.com/showpost.php...5&postcount=47

 

and you have it ready with the hall effect sensor ? is that extra?

 

deposit sent! look nice

 

Hall setup will be ready by end of the groupbuy. It is $40 extra.

Thanks dylyxcore!

Now at the next pricing level.

Updated List:

1. TitaniumTT (RCC)
2. FrankV702 (RX7CLUB) deposit paid
3. IAN (RCC/RX7CLUB) deposit paid
4. 13Brenova (RX7CLUB) paid in full
5. SirCygnus (RX7CLUB)
6. dylyxcore (RX7CLUB) deposit paid

 

If this sensor is better then the one provided with the kit I may go this route. (Hall setup)
Ian

 

Im trying to make enough extra money so i can add my name to the list before the 16th!

 

Here is our response for reluctor (mag) vs. hall from the FD kit thread:

"If your ecu has no interference issues then there is no benefit. reluctor = sine wave, hall=square wave. To simplify it, when your ecu gets a sine wave signal it converts it to a square wave to interpret the data. Switching to a Hall essentially takes the conversion out of the equation. On the other hand it DOES require power to be ran to the sensor (potentially a PITA if you already have a nice harness).

The issue USED to be that a lot of people ran a combination of Haltech and FC style CAS.
It was a bad combination of Haltech using mediocre quality reluctor adaptor (cough RA8 cough), a notoriously weak signal from the stock CAS, and possibly less than optimal wiring.

This was evident when a haltech e6k was having massive interference issues in a FC and was taken out and put into an FD or mitsubishi etc.. Now all of a sudden it worked fine.. Just a bad combination of things thats all."

 

10mm

 

Awesome, our trigger bracket should be able to swap in for the spacers and be a perfect fit then!

 

Judging by the characteristics of the bracket attaching to the actual front cover, and that the said bracket is 10mm thick, then it will work. I have one that I am trying to sell if anyone needs both of these units and verify.

Also, do you happen to know if this will work with a dry sump front cover?

 

have you worked it out for microtech yet?

 

Havent got the side mount alternator kit yet. but when i get it i will measure it. cheers