[For Sale] FD3S Interior Aluminum Door Pull Handles - $125/SET
#1
Registered User
Thread Starter
FD3S Interior Aluminum Door Pull Handles - $125/SET
Hello Everyone, we now have Interior Door Pull Handles in ALUMINUM for your FD!
Link: www.rotary13b1.com/p/1555/93-95-RX-7-FD3S-INTERIOR-DOOR-PULL-HANDLES.html
Intro Pricing = $125 / PAIR!
Please use coupon code: 7CLUB in order to get this price at checkout. $25 OFF because we just sign up as a Vendor here to upgrade your handles. = )
Quantity: Pair, includes Driver & Passenger
Material: Aluminum
Finish: Black, just like OEM
Fits: RX-7 FD3S
Model Years: 1993 - 1995 USDM Left Hand Drive ONLY. (This will NOT fit RHD)
We've done it again. We pREsent to you our new RX-7 FD3S 3rd Gen RX-7 INTERIOR Door Pull Handles in 100% Aluminum! Following up on our highly successful Exterior Handles, we knew that the interior pull cups are prone to cracking as well. After all...these parts are well over 20+ years old.
With our replacement FD3S Aluminum Interior door handles, they will now last as long as you own the car. Just check out the pictures to the left. The Aluminum Door handles are sold in pairs, we would like FD owners to replace both, so they match. Replacement is super easy, just remove the screw cover plate, unscrew, and gently pry your old plastic door pull handles out. The only piece you will have to reuse is the screw cover plate for both sides, as ours do not come with them. Installation should take no more than 10 mins per side, even if you'RE taking your time.
A great way to upgrade the interior of your RX-7, the door handles feel great when you close your doors! Some of the guys on here already jumped on a set last week during the introduction. Comments are appreciated.
Link: www.rotary13b1.com/p/1555/93-95-RX-7-FD3S-INTERIOR-DOOR-PULL-HANDLES.html
Intro Pricing = $125 / PAIR!
Please use coupon code: 7CLUB in order to get this price at checkout. $25 OFF because we just sign up as a Vendor here to upgrade your handles. = )
Quantity: Pair, includes Driver & Passenger
Material: Aluminum
Finish: Black, just like OEM
Fits: RX-7 FD3S
Model Years: 1993 - 1995 USDM Left Hand Drive ONLY. (This will NOT fit RHD)
We've done it again. We pREsent to you our new RX-7 FD3S 3rd Gen RX-7 INTERIOR Door Pull Handles in 100% Aluminum! Following up on our highly successful Exterior Handles, we knew that the interior pull cups are prone to cracking as well. After all...these parts are well over 20+ years old.
With our replacement FD3S Aluminum Interior door handles, they will now last as long as you own the car. Just check out the pictures to the left. The Aluminum Door handles are sold in pairs, we would like FD owners to replace both, so they match. Replacement is super easy, just remove the screw cover plate, unscrew, and gently pry your old plastic door pull handles out. The only piece you will have to reuse is the screw cover plate for both sides, as ours do not come with them. Installation should take no more than 10 mins per side, even if you'RE taking your time.
A great way to upgrade the interior of your RX-7, the door handles feel great when you close your doors! Some of the guys on here already jumped on a set last week during the introduction. Comments are appreciated.
The following users liked this post:
Pherve (05-18-23)
#5
Registered User
Thread Starter
Kensin, fitment is spot on. They're produced from brand new OEM stock pieces. = )
Here are come comments by real people on FB:
Sean M. - They are amazingly well built and they look cool as hell. I can't wait to install them. One more part that will never break on my interior. Winning!
Jehan P. - I installed mine the other day. What a difference! The tabs under the cast aluminum are slight different from the oem unit and actually hug the door lock mechanism tighter, resulting in a tighter and more sturdier feel. These things need more visibility in the market - I don't think enough people know about them.
Here are come comments by real people on FB:
Sean M. - They are amazingly well built and they look cool as hell. I can't wait to install them. One more part that will never break on my interior. Winning!
Jehan P. - I installed mine the other day. What a difference! The tabs under the cast aluminum are slight different from the oem unit and actually hug the door lock mechanism tighter, resulting in a tighter and more sturdier feel. These things need more visibility in the market - I don't think enough people know about them.
The following users liked this post:
GoodfellaFD3S (04-21-22)
Trending Topics
#9
Rotary Enthusiast
Any plans to make RHD versions?
The following 2 users liked this post by ZacMan:
Dumbguy727 (01-19-22),
mr2peak (07-01-21)
The following users liked this post:
ckool (04-23-22)
#14
Need some help installing these.
The tabs on the cup that clip around the door lock mechanism cannot expand and
clip in like the plastic part so we cannot get the cup to seat properly.
There must be some install trick we are missing.
The tabs on the cup that clip around the door lock mechanism cannot expand and
clip in like the plastic part so we cannot get the cup to seat properly.
There must be some install trick we are missing.
#16
Full Member
Just use a flat file and file down the inside of them a bit more.
#18
Rotary Enthusiast
Anyone sell RHD versions of this? I need a pair
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] EVO-R FD3S Carbon Door Sills with RX-7 Logo
fd3s777
Vendor Classifieds
7
09-16-19 04:25 PM
fd3s777
Vendor Classifieds
0
11-27-17 05:15 AM