who do i switch a rotory to a v-8 v-6
Passenger
Posts: n/a
who do i switch a rotory to a v-8 v-6
ok i just bought a 88 non turbo rx that only had a trany in it it was a rolling chassie for 300 dollers and i know it i shard to put together a 13b so i wanna put in a 350 351 283 383 if i can of what ever i can find but i am not sure what have to do
their is a **** load of wires in their but i dont know what gose where so is their any one out their that has dont this conversion to an RX 13b to a v8 ect
so if you have what do i do cuz i am like
do i do on the can what wires do i need to find i know i need to fing the tach wire do i i just put in a diffrent one fule dur i know that but do i need diff motor mounts and all the good stuff
can i use the oil coller or not so if their is any one out their let me know if you have done this cuz i wanna race
and get on the road
pm me leave a message or e-mail me at mikeyb_2003@hotmail.com
thank you all mike
their is a **** load of wires in their but i dont know what gose where so is their any one out their that has dont this conversion to an RX 13b to a v8 ect
so if you have what do i do cuz i am like
do i do on the can what wires do i need to find i know i need to fing the tach wire do i i just put in a diffrent one fule dur i know that but do i need diff motor mounts and all the good stuffcan i use the oil coller or not so if their is any one out their let me know if you have done this cuz i wanna race
and get on the roadpm me leave a message or e-mail me at mikeyb_2003@hotmail.com
thank you all mike
Seduced by the DARK SIDE
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
1) Put on your flame suit.
2) go to http://www.grannysspeedshop.com/
Note the complete kit is $1795 + labor + engine.
2) go to http://www.grannysspeedshop.com/
Note the complete kit is $1795 + labor + engine.
Last edited by SureShot; Feb 20, 2003 at 01:24 PM.
Got Boost?
Joined: Feb 2002
Posts: 1,066
Likes: 1
From: Watertown, MA
Believe me.... I promise that its a bit more involved than just finding the tach wire.... lol.... your putting a archaic engine from a different side of the planet in you car!! motor mounts are going to be the least of your issues.
I haven't done the v8 swap, because I have a moral line I will never cross. You can do what you want with your car, of course. Do a search for granny's speed shop and v8 RX-7 swap on google. They specialize in this particular monstrosity.
I haven't done the v8 swap, because I have a moral line I will never cross. You can do what you want with your car, of course. Do a search for granny's speed shop and v8 RX-7 swap on google. They specialize in this particular monstrosity.
Trending Topics
Senior Member
Joined: Jul 2001
Posts: 456
Likes: 0
From: Las Vegas
mikeyb2003:
This forum has some good guys on it, and there is a lot of RX-7 help here.
BUT...These guys have a secret rotor religion and you offend them greatly.
I have done several swaps and absolutely love the results.
Come over to
www.torquecentral.com
and don't get the roto-religious police after you.
This forum has some good guys on it, and there is a lot of RX-7 help here.
BUT...These guys have a secret rotor religion and you offend them greatly.
I have done several swaps and absolutely love the results.
Come over to
www.torquecentral.com
and don't get the roto-religious police after you.
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
chris: I probably could. 
Free car... I've got a 327 from a corvette sitting on my floor with transmission... that was free as well.... All I'd need to do is get some mounts and fab it all up. I bet I could do it for under $2,000
Free car... I've got a 327 from a corvette sitting on my floor with transmission... that was free as well.... All I'd need to do is get some mounts and fab it all up. I bet I could do it for under $2,000
SaraH
Joined: Feb 2003
Posts: 47
Likes: 0
From: Colorado
Originally posted by mikeyb2003
the thing is i no not very much about a rotory
the thing is i no not very much about a rotory
holy **** that is an awesome smiley 
Sorry.. not trying to flame. But i think you might want a pro to do this...
Grannysspeedshop.com.. look there
Senior Member
Joined: Jul 2002
Posts: 298
Likes: 0
From: West Covina, CA
Re: who do i switch a rotory to a v-8 v-6
Originally posted by mikeyb2003
ok i just bought a 88 non turbo rx that only had a trany in it it was a rolling chassie for 300 dollers and i know it i shard to put together a 13b so i wanna put in a 350 351 283 383 if i can of what ever i can find but i am not sure what have to do
their is a **** load of wires in their but i dont know what gose where so is their any one out their that has dont this conversion to an RX 13b to a v8 ect
so if you have what do i do cuz i am like do i do on the can what wires do i need to find i know i need to fing the tach wire do i i just put in a diffrent one fule dur i know that but do i need diff motor mounts and all the good stuff
can i use the oil coller or not so if their is any one out their let me know if you have done this cuz i wanna race and get on the road
pm me leave a message or e-mail me at mikeyb_2003@hotmail.com
thank you all mike
ok i just bought a 88 non turbo rx that only had a trany in it it was a rolling chassie for 300 dollers and i know it i shard to put together a 13b so i wanna put in a 350 351 283 383 if i can of what ever i can find but i am not sure what have to do
their is a **** load of wires in their but i dont know what gose where so is their any one out their that has dont this conversion to an RX 13b to a v8 ect
so if you have what do i do cuz i am like
do i do on the can what wires do i need to find i know i need to fing the tach wire do i i just put in a diffrent one fule dur i know that but do i need diff motor mounts and all the good stuffcan i use the oil coller or not so if their is any one out their let me know if you have done this cuz i wanna race
and get on the roadpm me leave a message or e-mail me at mikeyb_2003@hotmail.com
thank you all mike
Full Member
Joined: Apr 2001
Posts: 185
Likes: 0
From: Dublin, Oh, USA
'87 Sport
Jspec TII engine
full 3 inch exhaust
hks intake w/ 3 inch tid
hks ssq bov
MRT FCD
S5 intake manifold
8mm Accel Wires/NGK platinums
boost/temp/a/f gauges
ported wg w/ mbc
fmic
weight reduction
walbro fuel pump
16in rims w/ 225 series tires
hks type-1 turbo timer
e-fan Yea all for 2 grand. Maybe you can spend a buck or two for some calculator batteries, as i think your math may be off a bit. Or possibly hook us all up with your super discount "store"
Jspec TII engine
full 3 inch exhaust
hks intake w/ 3 inch tid
hks ssq bov
MRT FCD
S5 intake manifold
8mm Accel Wires/NGK platinums
boost/temp/a/f gauges
ported wg w/ mbc
fmic
weight reduction
walbro fuel pump
16in rims w/ 225 series tires
hks type-1 turbo timer
e-fan Yea all for 2 grand. Maybe you can spend a buck or two for some calculator batteries, as i think your math may be off a bit. Or possibly hook us all up with your super discount "store"
Senior Member
Joined: Apr 2001
Posts: 593
Likes: 0
From: Dublin, VA
Originally posted by cdk 4219
'87 Sport
Jspec TII engine
full 3 inch exhaust
hks intake w/ 3 inch tid
hks ssq bov
MRT FCD
S5 intake manifold
8mm Accel Wires/NGK platinums
boost/temp/a/f gauges
ported wg w/ mbc
fmic
weight reduction
walbro fuel pump
16in rims w/ 225 series tires
hks type-1 turbo timer
e-fan Yea all for 2 grand. Maybe you can spend a buck or two for some calculator batteries, as i think your math may be off a bit. Or possibly hook us all up with your super discount "store"
'87 Sport
Jspec TII engine
full 3 inch exhaust
hks intake w/ 3 inch tid
hks ssq bov
MRT FCD
S5 intake manifold
8mm Accel Wires/NGK platinums
boost/temp/a/f gauges
ported wg w/ mbc
fmic
weight reduction
walbro fuel pump
16in rims w/ 225 series tires
hks type-1 turbo timer
e-fan Yea all for 2 grand. Maybe you can spend a buck or two for some calculator batteries, as i think your math may be off a bit. Or possibly hook us all up with your super discount "store"
He's got a car with no engine. The engine alone would cost $2,000 (for a rebuilt N/A) and then is has no goodies. He'd still need an intake and accesories etc. Could go with a Jspec (only turbos available) but then need the ECU, knock sensor etc, Cars a N/A so wouldn't go with the N/A drive line.
Only way to recover this Rx-7 is to take another car and mix it together. The other car could be and Rx-7 or something else but it will be the only cost effective way to go.
What to do first.
Thread
Thread Starter
Forum
Replies
Last Post
Snook
3rd Generation Specific (1993-2002)
23
Sep 30, 2015 11:36 AM
