302 in SA headers
#1
Junior Member
Thread Starter
Join Date: Jan 2018
Location: long island NY
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
302 in SA headers
Can anyone give me part numbers and brands for 302 headers in an SA. I have a set of BBKs out of a 91 mustang but there is no way they are going to work without completely rerouting the #6 tube.
#2
Senior Member
You should take a look through my build, I used some Mac shorty's. I had trouble with the BBKs, too. The MACs are pretty similar shaped to the stock Foxbody shape, but bent much smoother.
#4
Senior Member
Pretty sure these are the ones I got. I did have to massage a couole of tubes to clear the steering gear. And then clearance the firewall a little bit. It’s all documented on my thread.
The App is for a 1993 Mustang - CARB legal.
https://www.americanmuscle.com/mac-c...orty-7993.html
The App is for a 1993 Mustang - CARB legal.
https://www.americanmuscle.com/mac-c...orty-7993.html
#6
Junior Member
Thread Starter
Join Date: Jan 2018
Location: long island NY
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Turns out they fit well. real minor dent in the tube next to the steering box and a little denting of the floor on both sides where the header flange connects to the down pipe. Thanks
#7
Senior Member
I’m glad that they worked out for you. I wish there was a better airgap between them and the steering box - but it is what it is. Hopefully we don’t burn up the steering box.
Thread
Thread Starter
Forum
Replies
Last Post
3rd and final 7
1st Generation Specific (1979-1985)
8
02-09-06 05:38 PM