302 in SA headers
Can anyone give me part numbers and brands for 302 headers in an SA. I have a set of BBKs out of a 91 mustang but there is no way they are going to work without completely rerouting the #6 tube.
|
You should take a look through my build, I used some Mac shorty's. I had trouble with the BBKs, too. The MACs are pretty similar shaped to the stock Foxbody shape, but bent much smoother.
|
Do you have a part # or app for the MACs?
|
Pretty sure these are the ones I got. I did have to massage a couole of tubes to clear the steering gear. And then clearance the firewall a little bit. It’s all documented on my thread. The App is for a 1993 Mustang - CARB legal. https://www.americanmuscle.com/mac-c...orty-7993.html |
Thanks. I ordered a set of the MACs you used and hopefully they will need minimum work to fit. Once again thanks for the help.
|
Turns out they fit well. real minor dent in the tube next to the steering box and a little denting of the floor on both sides where the header flange connects to the down pipe. Thanks
|
Originally Posted by twan374
(Post 12322110)
Turns out they fit well. real minor dent in the tube next to the steering box and a little denting of the floor on both sides where the header flange connects to the down pipe. Thanks
|
All times are GMT -5. The time now is 03:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands