what does an average turbo2 run in the 1/4?

Reply Subscribe

Thread Tools

Search this Thread

Jul 12, 2008 | 02:42 PM

#26

FRFC3S

Partout Performance

iTrader: (24)

Joined: Mar 2007

Posts: 1,202

Likes: 0

From: .

Quote:

Originally Posted by FRFC3S

I ran a 14.9 with

RB 2.5 dp
bonez 2.5 cat
rb 2.5 catback
apexi intake
rp fcd
aem tru boost set to 50% duty cycle (7.5 in first, 8.5-9 in fourth)
stock sized wastegate
153k original engine that eats a small amount of coolant and grinds 2nd gear
17x8 wheels on 215 Nexxens
no ps, air pump, acv, ac
act 6 puck

slipping clutch at 3-4k I landed a 2.3 60'

It looks like stock to lightly modified tiis pull 15.5 - 14.5 VERY consistantly

Upped the boost a little, tuned it with the safc, pulled a 2.2 60' dumping the clutch at 4k and managed a 14.6 @ 99 mph.

REDONCULOUS amounts of wheelhop.

Aug 21, 2008 | 08:49 AM

#27

Slow Rotor

FC3S

Joined: Sep 2006

Posts: 745

Likes: 0

From: I come from a land downunder

I ran a 13.5 at 104 with the stock turbo, it tops out at 8 psi at rev limit which is 6500 rpm at the moment.

13b extend port, race seals and extra dowells
Blitz 3" exhaust
PWR front mount
HKS SSQV Bov
Microtech LTX8
K&N Pod Filter
Cusco 2 way LSD
Tein coilovers with EDFC
Was running goodyear eagle F1 GDS-3 Tyres, only 215/45zr17's so with a set of slicks would have been in the 12's was a fairly hot night too, track temp was over 30 deg C from memory

Oh and that was only a 2 sec 60ft

Oct 21, 2008 | 11:20 AM

#28

FRFC3S

Partout Performance

iTrader: (24)

Joined: Mar 2007

Posts: 1,202

Likes: 0

From: .

Quote:

Originally Posted by FRFC3S

Upped the boost a little, tuned it with the safc, pulled a 2.2 60' dumping the clutch at 4k and managed a 14.6 @ 99 mph.

REDONCULOUS amounts of wheelhop.

Ran a 14.3 @ 99 by shifting better and a fmic/test pipe. Track was slippery due to newbs in FWD going through box on street tires and not burning out good enough. Lots of wheelhop as well.