R/T .849
60' 1.713
330' 4.902
1/8 7.593
MPH 92.85
1000 9.869
1/4 11.817
MPH 115.88

http://www.prizer-painter.com/person.../dynochart.jpg

I think it might have something to do with the altitude...

Lower the altitude, more dense the air, higher horse power...

BTW, mods in my sig have gotten me a 14.7 at 94. But the strip I race at is at almost 5000 ft above sea level.

https://www.rx7club.com/forum/attach...postid=1964069

mods in sig

Oh I love the irony, of all the trash talking you do on non-turbo 7s about how slow they are, and you times are slower than mine and a handful of other non-turbos.

Sorry I just felt like pointing that out.

Ran a 14.6@97 with mods in sig. expcept for y-pipe, plug wires, and GXL hubs,wheels, LSD, Yoko tires.

my friend tony(87GTR) ran his in the 1/8th with a 7.5 at 91mph

Actually, I dont mind, the run was only a "shake out" run, I didnt even drive aggressively. Problem was, after the first pass, we got rained out, so thats the only time I have to present. I dont lie about things. I assure you, my car is capable of a much faster time. Other factors to consider. At 8pm when the run was put down, it was 100 degrees at over 3000 ft MSL (5000 ft was mentioned earlier but was incorrect). I talk trash about N/As as a joke, cause it gets all you guys all teed off. But here is the official smack talk:

Run me at the same track, and you will not win.

Jarrett

<3 thanks sweety

guys shouldnt say things like that to other guys :gay:

He was being sarcastic

Actually
200kw is 268hp
1 kiloWatt = 1.34102209 HP

Several 7.60's at 96/97mph (almost 98mph) using NT-555R Nitto drag radials (my then street tires) on pump gas and full street trim. I will break 100mph soon.

A few time slips up on http://bdc.genxracing.com as well as a couple videos of one of them..

B

1/8: 9.242@78.04
1/4: 14.23@98.6

dose anyone have the 1/4 time for soul assassins old car...im jus curious.

9.99

I ran 13.6 quarter on a basic stock setup, the guy that i mentioned earlier ran 8.4 1/8th with 2.5 60ft, and burning the tires thru second adn somewhat smoking them in third. I plan to be in the 10's if not lower when im done putting all the parts i have on my car adn painting it, the mods are in the sig.

-Chris

it's because some people are stupid and don't understand the difference between a KW and a HP

Back when my car was N/A I went 14.2 at 98mph with a 1.6 60ft (with 21" ET drags on) Had a weber and rb header and a completely gutted car wieghed 2160lbs.

R/T ... .970 (I was asleep)
60' ... 2.303
330 ... 6.767
1/8 ... 10.494
MPH ... 65.73
1000 ... 13.709
1/4 ... 16.411
MPH ... 82.86

Sadly this was against a new Pontiac Grand Prix GTP supercharged. He ran a 9.349 1/8 and a 14.492 1/4.

Supercharged Grand Prix ran a mid 14?? Wow, not bad. What elevation was the track?

GTP should be doing better than mid 14s.. not MUCH better but.. ;)

Ya well your auto drag car has a long way to go aswell.

FYI I've pulled a .508 before, so beat that.

my 1320 time was a 13.8 @ 102w/mods in sig. my 60-ft was 2.18

in my old S5 NA I ran a 16.0 at 89 mph. I had a 2.3 60ft mods were, cone air filter, racingbeat header/presilencer.

13.8x @ 104

boosting around 10.5-11 pounds.

60' time was a 2.3, I need to learn how to launch.

all i have going is reaction times, and beat the 504 some guy in a vette pulled!